(C102WS8) Quartz Flow Cell, 10 mm Path
10%
Original price was: $332.00.$299.00Current price is: $299.00.
C102WS8 is a quartz flow cell with a 10 mm optical path, two top tube connections with threaded fittings, and a compact 12.5 × 12.5 × 35 mm body. It is specified for UV/Vis use over 200–2500 nm and is supplied as 1 flow cell.
In Stock
Description
C102WS8 is a quartz flow cell with a 10 mm optical path and two top-mounted tube connections with threaded fittings. Its compact 12.5 × 12.5 × 35 mm body suits installations where the tubing should enter from above and where the holder footprint is limited, while the stated 200–2500 nm range supports UV/Vis work.
- Path Length
- 10 mm
- Cell Type
- Flow Cell
- Opening Configuration
- Two Top Tube Connections with Threaded Fittings
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Cell Body Dimensions | 12.5 × 12.5 × 35 mm |
| Body Height | 35 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Port Count | 2 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Top Tube Connections with Threaded Fittings |
Choose this option
Choose C102WS8 when your setup needs a 10 mm flow-cell path in a compact rectangular body and your tubing layout is better served by top-entry connections than by opposed end tubes. This arrangement is especially useful when there is usable space above the cell for fittings and tubing, but limited room around the sides.
What makes this option different
- Two top tube connections keep both fluid connections on the top face, which changes tubing routing and overhead clearance needs.
- Threaded fitting arrangement uses a threaded connection style rather than plain tube openings.
- Compact 12.5 × 12.5 × 35 mm body helps when the holder area is small and a short cell body is preferred.
- UV/Vis application range of 200–2500 nm supports methods within that wavelength range.
Using this cell
Install the cell so the top connections can be reached without forcing the tubing sideways. Fill the liquid path gradually, then inspect the illuminated region for bubbles before setting the blank or baseline.
The capacity of this selected option is not established here, so it should not be used as a fixed planning value for a volume-critical circuit. Treat tubing volume and any connected fittings as separate from the cell body dimensions.
No pressure limit is stated for this model, so pressure suitability should be checked before using it in a pressurized flow system.
First-use check
- Inspect the body, optical faces and visible connection points before installation.
- Confirm that the holder supports the 12.5 × 12.5 mm base and that the fittings clear the space above the cell.
- Fill with method blank first and check for leaks, bubbles and a stable baseline before running samples.
Fit and optical alignment
The confirmed 12.5 × 12.5 × 35 mm dimensions apply to the cell body itself rather than the full installed assembly. Allow extra height and lateral space for the threaded fittings, connected tubing and bend radius above the cell.
Z Height is not specified for this model, so beam-center matching should be checked against your instrument or holder before ordering. The optical path is 10 mm, but the available data does not define the light-transmission geometry beyond the UV/Vis application category.
Solvents and cleaning
This cell uses Molded 83 fabrication, a quartz flow-cell option commonly chosen for organic-solvent methods and temperature-controlled applications. Suitability still depends on the complete wetted assembly and on your actual chemical conditions, especially for aggressive solvents or long exposure.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
This sale record covers one flow cell of the listed specification. Package contents are not otherwise specified here.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review custom quartz flow cells for changes to dimensions, optical path, sample volume, windows or Z Height, connection style, and fabrication or tolerance requirements. Send a drawing or labelled sketch together with holder details, tubing requirements, sample conditions and quantity.
Additional information
| Weight | 3218 g |
|---|
You must be logged in to post a review.
You may also like…
10%
(C102CF1) Quartz Standard Cuvette, 10 mm Path, 3.5 mL
Original price was: $247.00.$223.00Current price is: $223.00.10%
(C102CF) Quartz Standard Cuvette, 10 mm Path, 3.5 mL
Original price was: $247.00.$223.00Current price is: $223.00.10%
(C102CF2) Quartz Standard Cuvette, 10 mm Path, 3.5 mL
Original price was: $247.00.$223.00Current price is: $223.00.10%
(C102CE1) Quartz Standard Cuvette, 10 mm Path, 3.5 mL, Pack of 2
Original price was: $95.00.$86.00Current price is: $86.00.Related products
11%
(MQC361) Quartz Capillary Tubes (Square), Outer Dim.: 0.5×0.5mm, Inner Dim.: 0.3×0.3mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.14%
(MQC369) Quartz Capillary Tubes (Square), Outer Dim.: 0.9×0.9mm, Inner Dim.: 0.7×0.7mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.15%
(MQC368) Quartz Capillary Tubes (Square), Outer Dim.: 0.9×0.9mm, Inner Dim.: 0.7×0.7mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.14%
Reviews
There are no reviews yet.