(C022WS7) Quartz Flow Cell, 2 mm Path, 700 µL

Weight	30 g

SKU: C022WS7

Original price was: $251.00.Current price is: $226.00.

In Stock

C022WS7 is a quartz flow cell for UV/Vis spectroscopy with a 2 mm optical path, 700 µL nominal capacity and Two-Way Light geometry. Two opposed tubes in a 5 mm OD / 3 mm ID size make this version useful when you want a simple straight flow connection and need to match the cell to existing tubing. Supplied as 1 flow cell.

In Stock

SKU: C022WS7 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022WS7 is a quartz flow cell for UV/Vis spectroscopy that combines a 2 mm optical path with a 700 µL nominal capacity in a Two-Way Light layout. Its opposed tube connections keep the flow arrangement straightforward, while the 5 mm OD / 3 mm ID tube size gives you a clear starting point for matching tubing and planning how the cell will sit in your line.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Opening Configuration: Two Opposed Fluid Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	700 µL
Cell Body Dimensions	38 × 4.5 × 12.5 mm
Material	Quartz
MQ Grade	Molded 83
Port Count	2
Tube Outer Diameter (OD)	5 mm
Tube Inner Diameter (ID)	3 mm
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Fluid Tubes

Choose this option

Choose C022WS7 when you need a fixed 2 mm transmission path in a flow-through format and want the connection size defined as part of the purchase. This version is especially useful if your setup already uses tubing around the 5 mm OD / 3 mm ID range and you want a compact optical body rather than a larger holder-style assembly.

What makes this option different

2 mm optical path for short-path UV/Vis transmission measurements in a flow cell format.
Two-Way Light geometry for measurement across one main optical axis rather than side-access layouts.
700 µL nominal capacity helps you estimate the cell portion of the wetted volume in your circuit.
Two opposed fluid tubes, 5 mm OD / 3 mm ID for direct connection planning at both ends of the cell.

Using this cell

Install the cell with the two opposed tubes aligned to your liquid line and fill gradually so the optical region wets evenly. Before measurement, inspect the light path for bubbles, droplets or residue, then run your blank after the cell and the immediate connected line are fully filled.

The listed 700 µL value is the nominal capacity of the cell itself. It does not describe the total liquid volume of connected tubing, fittings or reservoir sections, so full system volume should be planned separately if rinse time or sample changeover matters in your method.

First-use check

Inspect the quartz body and both tube ends for chips, cracks or visible contamination.
Confirm that your tubing arrangement suits the 5 mm OD / 3 mm ID connection size.
Fill slowly with a suitable blank and make sure the optical path is fully wetted and free of trapped bubbles.
Support the body during installation so the tube connections are not carrying the mechanical load.

Fit and optical alignment

The cell body dimensions are 38 × 4.5 × 12.5 mm for the central optical body, excluding the projecting tubes. Use those body dimensions to check holder contact and clearance around the measurement section, and use the tube size to plan how the line enters and leaves the cell.

Z Height is not stated for this SKU. If your instrument uses a fixed beam position or a close-fitting mount, check beam height and seating directly rather than relying on body size alone.

Solvents and cleaning

This flow cell is listed under Molded 83 fabrication. For flow work, choose sample and cleaning liquids with the complete wetted setup in mind, including any tubing, fittings or seals used elsewhere in your system.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 flow cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We also coordinate custom JGS1 quartz flow cells for changes to dimensions, optical path length, sample volume, optical windows or Z Height, connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with holder or instrument details through the contact page and reference C022WS7.