(C012WS4) Quartz Flow Cell, 1 mm Path, 350 µL

Weight	30 g

SKU: C012WS4

Original price was: $270.00.Current price is: $243.00.

In Stock

C012WS4 is a quartz flow cell for UV/Vis work with a 1 mm optical path, 350 µL nominal capacity and Two-Way Light geometry. Two opposed fluid tubes with 4 mm OD and 2 mm ID make it suitable for fixed in-line flow layouts. Supplied as 1 piece.

In Stock

SKU: C012WS4 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012WS4 is a quartz flow cell for UV/Vis setups that need a 1 mm optical path in a fixed in-line format. It combines Two-Way Light geometry with two opposed fluid tubes and a 350 µL nominal capacity, making it a straightforward choice when the sample line remains connected during measurement.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Two Opposed Fluid Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	350 µL
Cell Body Dimensions	38 × 3.5 × 12.5 mm
Material	Quartz
MQ Grade	Molded 83
Port Count	2
Tube Outer Diameter (OD)	4 mm
Tube Inner Diameter (ID)	2 mm
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Fluid Tubes

Choose this option

Choose C012WS4 when you need a 1 mm path flow cell with transmission through two opposite optical faces and a simple end-to-end fluid connection layout. It is a practical option for installations where body size, tube dimensions and nominal cell volume all need to fit within the same holder and circuit plan.

What makes this option different

1 mm optical path with 350 µL nominal capacity in a fixed flow-through cell.
Two-Way Light geometry for measurement through two opposite optical faces.
Two opposed tubes, 4 mm OD and 2 mm ID for in-line connection planning.
38 × 3.5 × 12.5 mm body dimensions for checking holder seating around the optical section.

Using this cell

Install the cell as part of the flow line and fill it slowly so the optical region wets fully before measurement. For repeatable UV/Vis work, establish the blank after the cell and connected tubing have stabilised under your actual flow conditions.

The stated 350 µL is the nominal volume of the cell itself. It does not include the volume of connected tubing, fittings or the rest of the circuit, and no minimum working volume is listed here.

First-use check

Inspect the cell body and tube ends for visible damage or contamination.
Trial-fit the cell in the holder and confirm clearance for both tube connections.
Fill with a suitable blank or carrier liquid and inspect the optical region for trapped bubbles before baseline measurement.

Fit and optical alignment

Check holder seating against the 38 × 3.5 × 12.5 mm cell body and make sure there is enough clearance for the fixed tubes at both ends. The 4 mm OD connections may affect access in compact holders even where the optical body itself fits comfortably.

Z Height is not specified for this SKU. If your instrument uses a fixed beam position, confirm that the beam will pass through the intended optical region before ordering.

Solvents and cleaning

This cell uses Molded 83 fabrication. This construction is commonly selected for organic-solvent methods and applications involving temperature-controlled work, but solvent choice and cleaning routine should be suitable for the complete wetted assembly.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. After use, rinse promptly and clean the outer optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 flow cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions related to this design, including changes to dimensions, optical path length, nominal volume, optical windows or Z Height, connections, fabrication and tolerances. Send a drawing or labelled sketch, your holder or instrument details, and the chemical and temperature conditions for the sample through the contact page, and quote part number C012WS4.