(C104WS8) Quartz Flow Cell, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C104WS8

Original price was: $270.00.Current price is: $243.00.

In Stock

C104WS8 is a quartz flow cell for UV/Vis work with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. This version uses two opposed fixed tubes in 7 mm OD / 5 mm ID, making the connection size a primary selection point for your flow setup. Supplied as 1 cell.

In Stock

SKU: C104WS8 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104WS8 is a quartz flow cell for UV/Vis spectroscopy with a 10 mm optical path and 3.5 mL nominal capacity. Its Four-Way Light layout and larger fixed 7 mm OD / 5 mm ID tube connections suit setups where the liquid connection size matters as much as the optical path.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Two Opposed Fluid Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
External Dimensions	60 × 12.5 × 12.5 mm
Cell Body Dimensions	35 × 12.5 × 12.5 mm
Uncapped Cell Dimensions	60 × 12.5 × 12.5 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
MQ Grade	Molded 83
Port Count	2
Tube Outer Diameter (OD)	7 mm
Tube Inner Diameter (ID)	5 mm
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Fluid Tubes
Wall Thickness	1.25 mm

Choose this option

Choose C104WS8 when you need a straight-through two-port quartz flow cell and your tubing layout is built around larger end connections. This version is especially useful when you want the cell body and the fixed tube size to be planned together, rather than selecting the optical cell first and solving the connection space later.

What makes this option different

10 mm optical path for UV/Vis measurements in a flow-through format.
Four-Way Light configuration for optical access from multiple sides of the cell body.
Two opposed fixed tubes with 7 mm OD and 5 mm ID.
60 × 12.5 × 12.5 mm overall uncapped dimensions, with a 35 mm body length.

Using this cell

Install the cell into a suitable liquid path with support for the body and adequate space for the fixed tubes at both ends. Fill slowly and inspect the optical region before measurement so that bubbles, droplets or residue do not remain in the light path.

The nominal 3.5 mL figure applies to the cell itself. If your procedure depends on total circuit volume or rinse volume, include the liquid held in connected tubing and fittings separately.

First-use check

Inspect the optical faces and both tube ends for chips, residue or transport damage.
Dry-fit the cell and confirm that the tube approach is clear in the holder.
Fill with a suitable clean liquid and confirm the illuminated region is fully wetted and bubble-free.
Run a blank under the same installed flow conditions you plan to use.

Fit and optical alignment

The stated 60 × 12.5 × 12.5 mm dimensions describe the uncapped cell including the fixed tubes, while the 35 mm figure refers to the body length. Leave additional room beyond that for attached tubing, connector hardware and bend radius at each end.

Four-Way Light identifies the supported optical access category. Z Height is not stated for this model, so instrument fit should be checked against your holder and beam position instead of assuming alignment from the outer size alone.

Solvents and cleaning

This cell uses Molded 83 fabrication. It is commonly selected for methods that may involve organic solvents or temperature-controlled use, while the final choice should still consider the complete wetted path, including any tubing and fittings connected to the cell.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

1 quartz flow cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom quartz flow cells for changes involving dimensions, optical path length, sample volume, windows or Z Height, connections and tolerances. Send your drawing or holder details through the contact page and refer to C104WS8.