(C1002CS2) Quartz Colorimetric Cuvette, 100 mm Path, 60 mL

Weight	100 g

SKU: C1002CS2

Original price was: $95.00.Current price is: $86.00.

In Stock

C1002CS2 is a quartz colorimetric cuvette with a 100 mm optical path, 60 mL nominal capacity and an open-top body for direct filling. Its long 104 × 20 × 40 mm body suits methods planned around an extended transmission length rather than a compact routine cell. Sold as 1 cuvette per listed price unit.

In Stock

SKU: C1002CS2 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C1002CS2 is a quartz colorimetric cuvette with a 100 mm optical path and 60 mL nominal capacity. The open-top body gives direct access for filling, emptying and rinsing, and the long rectangular format suits methods that are set up around a full 100 mm transmission path in a single cell.

This option is sold as one cuvette. The body dimensions are 104 × 20 × 40 mm, so the physical footprint matters alongside the optical path when you check holder space and beam position.

Path Length: 100 mm
Sample Volume (Nominal): 60 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	100 mm
Sample Volume (Nominal)	60 mL
External Dimensions	104 × 20 × 40 mm
Cell Body Dimensions	104 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	104 × 20 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C1002CS2 when your procedure specifically requires a 100 mm path in a quartz colorimetric cell and you have room for a long-body format. The open top keeps sample handling simple, while the 60 mL nominal capacity matches methods that need a larger fill volume than shorter cells usually provide.

What makes this option different

100 mm optical path for long-path transmission methods.
Quartz body for a listed quartz version of this long-format cell.
Open-top chamber for direct filling, rinsing and visual inspection.
104 × 20 × 40 mm body-only size that should be checked carefully against holder length and clearance.

Using this cell

Fill the cell from the top and make sure the sample covers the measurement region used by your instrument. Remove visible bubbles before measurement, especially along the beam path, and keep the same orientation for blank and sample if your method depends on consistent placement.

The 60 mL figure is a nominal capacity, not a minimum working volume. If your procedure uses less than the nominal fill, verify that the liquid level still covers the beam in your setup.

First-use check

Inspect the clear faces and edges for chips, scratches or handling residue.
Rinse with a liquid suitable for your method before first use.
Place the empty cell in the holder to confirm seating and surrounding clearance.
Run a blank at your intended fill level before measuring samples.

Fit and optical alignment

The stated dimensions apply to the body only: 104 × 20 × 40 mm. Check holder seating, slot length and nearby clearance before ordering, because this is a long cell body rather than a compact standard footprint.

Z Height is not established here, so compatibility should not be assumed from the outer dimensions or path length alone. If your instrument uses a fixed beam-center height or a defined optical-face arrangement, please verify those requirements before purchase.

Solvents and cleaning

Clean with a non-abrasive laboratory wipe and handle the optical faces gently. Exact chemical limits for this selected option are not established here, so chemically demanding samples, rinse liquids or cleaning agents should be reviewed before use.

For general background on MQ fabrication categories, see Compare fabrication methods. This page is a general reference and does not replace checking the suitability of your actual sample and cleaning conditions.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body size, sample volume, opening style or holder-related geometry, send a drawing or labelled sketch for review. Please include the critical dimensions, your instrument or fixture details, the sample conditions and the target quantity at this contact page.