(C1002CS3) Quartz Colorimetric Cuvette, 100 mm Path, 60 mL

Weight	100 g

SKU: C1002CS3

Original price was: $223.00.Current price is: $201.00.

In Stock

C1002CS3 is a quartz colorimetric cuvette with a 100 mm optical path, 60 mL nominal capacity and an open-top body. It is intended for colorimetry in a long 104 × 20 × 40 mm format that gives direct top access for filling and rinsing. Sold as 1 cuvette per listed price unit.

In Stock

SKU: C1002CS3 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C1002CS3 is a quartz colorimetric cuvette for colorimetry, with a 100 mm optical path and 60 mL nominal capacity. The open-top body allows direct filling, emptying and rinsing, and the long rectangular format suits methods that are built around a full 100 mm sample path in one cell.

This option is supplied as one cuvette. The 104 × 20 × 40 mm body format is part of the selection decision as well as the optical path, because the cell needs enough holder space and the beam still needs to pass through the intended measurement region.

Path Length: 100 mm
Sample Volume (Nominal): 60 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	100 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	60 mL
External Dimensions	104 × 20 × 40 mm
Cell Body Dimensions	104 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	104 × 20 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C1002CS3 when your colorimetric method requires a 100 mm path in a quartz cell and you want straightforward access from the top for bench filling and rinsing. Its 60 mL nominal capacity fits procedures that work with a larger liquid volume than shorter comparison cells.

What makes this option different

100 mm optical path for long-path colorimetric measurement.
Quartz body in the listed quartz version of this long-format cell.
Open-top chamber for direct sample loading and cleaning access.
104 × 20 × 40 mm body-only dimensions that should be checked against holder size and clearance.

Using this cell

Fill from the top and make sure the liquid level covers the beam region during measurement. Remove visible bubbles before taking readings, and keep the cell orientation consistent for blank and sample if your procedure relies on repeatable positioning.

The 60 mL figure is a nominal capacity, not a minimum working volume. If you plan to work below the nominal fill, check that the beam remains fully covered in your instrument.

First-use check

Inspect the optical faces and edges for chips, scratches or residue.
Rinse the chamber with a suitable liquid before first use.
Test the empty cell in your holder for seating and clearance.
Run a blank at your intended fill condition before measuring samples.

Fit and optical alignment

The body dimensions are 104 × 20 × 40 mm, with a 104 × 20 mm base footprint. Use these values to review holder width, length and surrounding clearance before ordering, especially if your setup was designed for shorter cells.

Beam-center height is not specified here, so instrument fit should not be assumed from outer size or path length alone. The product family name indicates colorimetric use, but it does not by itself establish fit with every named instrument or comparator.

Solvents and cleaning

This is a quartz cell, but the exact chemical limits for this SKU are not established here. Do not rely on a short broad-compatibility label if your sample, rinse liquid or cleaning routine is chemically demanding.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with a soft, non-abrasive laboratory tissue. For broader construction background, see Compare fabrication methods.

Included with this option

1 cuvette.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, optical path length, sample volume, openings, holder-related geometry and other project requirements. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions and target quantity at this contact page.