(C133.42CS1) Quartz Colorimetric Cuvette, 133.4 mm Path, 80 mL

Weight	100 g

SKU: C133.42CS1

Original price was: $252.00.Current price is: $227.00.

In Stock

C133.42CS1 is a quartz colorimetric cuvette with a 133.4 mm optical path, 80 mL nominal capacity and an open-top body for direct filling. This long-path rectangular cell suits methods built around this specific measurement length and a larger sample fill. Supplied as 1 cuvette.

In Stock

SKU: C133.42CS1 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C133.42CS1 is a quartz colorimetric cuvette for methods that use a 133.4 mm optical path in an open sample chamber. Its 80 mL nominal capacity and long rectangular body make it suitable where the sample is filled directly from the top rather than through a cap or tubing. This option is sold as one cuvette.

Path Length: 133.4 mm
Sample Volume (Nominal): 80 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	133.4 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	80 mL
External Dimensions	137.4 × 20 × 40 mm
Cell Body Dimensions	137.4 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	137.4 × 20 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose this cell when your method depends on a 133.4 mm path length and you want direct top access for filling, emptying and rinsing. The open body is practical for manual sample handling, and the stated 80 mL nominal capacity fits methods that already work with a comparatively large fill volume in a colorimetric format.

What makes this option different

133.4 mm optical path for long-path transmission measurements in colorimetry.
80 mL nominal capacity for methods that use a larger sample fill.
Open-top body for direct loading, pouring out and rinse access.
Quartz construction in a 137.4 × 20 × 40 mm body for holder and clearance checks.

Using this cell

Fill from the top opening and make sure the liquid level fully covers the beam during measurement. If your method uses a blank and sample sequence, keep the same cell orientation each time and handle the cuvette by the non-optical surfaces where possible.

The 80 mL figure is the nominal cell capacity. It should not be treated as a minimum working volume, so partial-fill methods should be checked against the actual beam position in your instrument.

First-use check

Inspect the clear faces and rim for residue or handling marks before first use. Rinse the cell, place it in the holder, and run a blank in the intended orientation to confirm seating and beam coverage.

Fit and optical alignment

The body dimensions are 137.4 × 20 × 40 mm, and they apply to the cell body. These dimensions are useful for checking holder opening, compartment length and top clearance for filling and removal.

Z Height is not stated for this SKU. If your instrument has a fixed beam height or a dedicated holder, check optical alignment separately rather than relying on the outer body size alone.

Solvents and cleaning

Quartz is the body material for this cell, but no exact chemical-use limits are stated for this option. Select it according to your actual sample and cleaning routine, and review Compare fabrication methods if you are assessing different construction approaches across related cells.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods, and wipe the outer optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 cuvette. This is an open-top cell; no closure is specified for the listed sale option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, path length, sample volume, optical windows or Z Height, closures and connections, fabrication, and tolerance requirements. Send a dimensioned drawing or labelled sketch, your holder or instrument details, sample conditions, and required quantity via https://machinedquartz.com/contact/, and quote part number C133.42CS1.