(C052CS7) Quartz Large-Window Cuvette, 5 mm Path

Weight	100 g

SKU: C052CS7

Original price was: $109.00.Current price is: $99.00.

In Stock

C052CS7 is a quartz large-window cuvette with a 5 mm optical path and an open-top rectangular body. It suits buyers who need this specific 5 mm path in a broad-face cuvette format for direct top filling rather than a closed or connected assembly. Supplied as 1 cuvette per price unit.

In Stock

SKU: C052CS7 Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C052CS7 is the 5 mm path version of this quartz large-window cuvette format. Its open-top rectangular body gives direct access for filling, emptying and rinsing, making it a practical choice when your method is already set for a 5 mm optical path and you want a broad-face cell rather than a narrow micro format.

For this SKU, the path length and open-top geometry are the main established selection points. Supplier wording also describes the material as resistant to acids, alkalis and organic liquids, but that statement does not define concentrations, temperature, contact time or complete-assembly limits.

Path Length: 5 mm
Cell Type: Large-Window Cuvette
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	5 mm
Material	Quartz
Opening Configuration	Open Top

Choose this option

Choose C052CS7 when the 5 mm optical path is the key requirement in your method and you want a quartz cell with direct top access. This option is a good fit for buyers replacing the same format or working from an existing holder reference, especially when they do not need a sealed closure or a flow connection.

What makes this option different

5 mm optical path as the defining confirmed specification for this SKU.
Large-window rectangular body for a broad optical-face format rather than a narrow micro cell.
Open-top configuration for direct pipetting, rinsing and sample inspection from above.
Single-cuvette sale unit with 1 cuvette per listed price unit.

Using this cell

Fill from the open top and make sure the liquid covers the illuminated region used by your instrument. Keep the measurement orientation consistent between blank and sample, and remove bubbles or exterior droplets from the optical faces before reading.

Because nominal capacity and minimum working volume are not established here, set your working fill from your actual beam position and holder geometry rather than from an assumed volume. This is an open-top cell, not a stated pressure-rated or leak-tight assembly.

First-use check

Inspect the optical faces and top opening for chips, residue or transit damage.
Test the fit in your holder before filling to the intended level.
Run a blank to confirm beam coverage and stable seating.
After filling, recheck the light path for visible bubbles or exterior droplets.

Fit and optical alignment

The outside dimensions and Z Height are not established for this SKU. If your instrument holder has limited clearance or uses a fixed beam-center height, verify fit from your own holder, drawing or existing cell before ordering.

For replacement work, match this cuvette against the geometry you already use instead of assuming it shares the envelope of another path-length option in the same family. A 5 mm path does not by itself define the full outside size or beam position.

Solvents and cleaning

Supplier wording for this exact SKU states resistance to acids, alkalis and organic liquids, but it does not define concentrations, temperature, contact time or complete-assembly conditions. Treat that statement as a general material direction, not as a universal chemical approval.

For fabrication background, see the MQ fabrication guide. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe optical faces gently with non-abrasive optical tissue.

Included with this option

One C052CS7 cuvette. The listed price is for one item.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; final feasibility, quantity, specifications, price and production time are confirmed in the project quotation. Contact us here and mention C052CS7.