(C202CR6) Quartz Large-Window Cuvette, 10 mm Path, 7 mL

Weight	30 g

SKU: C202CR6

Original price was: $86.00.Current price is: $78.00.

In Stock

C202CR6 is a JGS1 quartz large-window cuvette for UV/Vis work with a 10 mm optical path, Two-Way Light transmission layout and 7 mL nominal capacity. Its open-top body supports direct filling, and a closure is included for covered handling between measurement steps. Sold per 1 cuvette.

In Stock

SKU: C202CR6 Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C202CR6 is a JGS1 quartz large-window cuvette for UV/Vis measurements from 200 to 2500 nm. It pairs a 10 mm optical path with a 7 mL nominal capacity in an open-top rectangular body, making it a practical choice when you want direct access for liquid loading and a full-size sample chamber in a large-window format.

Path Length: 10 mm
Sample Volume (Nominal): 7 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	7 mL
External Dimensions	22.5 × 12.5 × 45 mm
Cell Body Dimensions	22.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C202CR6 when your method is built around a 10 mm transmission path and your holder or workflow suits a large-window rectangular cuvette body. The open top keeps filling and rinsing simple, while the 7 mL nominal capacity suits routine liquid measurements where you want direct top access instead of a small micro-volume chamber or ported design.

What makes this option different

10 mm optical path for UV/Vis transmission methods that use a standard path length.
Two-Way Light layout for straight-through optical access across the measurement path.
Open-top body for direct pipetting, blank preparation and rinse access from above.
7 mL nominal capacity for a full-size sample chamber rather than a reduced-volume geometry.
22.5 × 12.5 × 45 mm body-only format to check against holder space and surrounding clearance.
JGS1 quartz construction for use over the stated UV/Vis wavelength range.
Closure included for covered handling, without implying a pressure-rated or leak-tested seal.

Using this cell

Fill the cell from the top and make sure the liquid level covers the illuminated region during measurement. Keep blank and sample in the same orientation if your holder locates the cuvette in one fixed direction.

Check for bubbles, exterior droplets and residue before reading, especially on the transmitting faces. The stated 7 mL is a nominal capacity for the cell and should not be treated as a minimum working volume for every instrument geometry.

First-use check

Inspect the optical faces, top opening and edges for chips, dust or residue.
Seat the cuvette in the holder and confirm stable positioning with a suitable blank.
After filling, remove visible bubbles and repeat the blank and sample in the same orientation.

Fit and optical alignment

The stated 22.5 × 12.5 × 45 mm dimensions describe the body only. If your setup has limited top clearance or depends on the total assembled height, check that space separately because the overall size with the closure in place is not stated here.

Z Height is not specified for this SKU. For holders with a fixed beam position, verify alignment against your current cell or holder dimensions before ordering.

Solvents and cleaning

This quartz cell is intended for UV/Vis sample handling and measurement. For general fabrication background, see the MQ fabrication guide.

The joining method is not specified for this SKU, so cleaning and sample chemistry should be selected with your actual procedure in mind rather than assumed from a fabrication grade. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with suitable laboratory wipes and rinse solvents appropriate to your workflow.

Included with this option

Priced and sold per 1 cuvette. A closure is included. Other package contents are not specified for this SKU.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes to dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication requirements. If you need a different layout, send your holder details or a labelled drawing through the contact page and quote C202CR6.