(C202CE2) Quartz Rectangular Sample Cell, 20 mm Path

Weight	100 g

SKU: C202CE2

Original price was: $113.00.Current price is: $102.00.

In Stock

C202CE2 is a JGS1 quartz rectangular sample cell with a 20 mm optical path, a Two-Way Light layout and an open-top chamber for direct top filling. Its 24 × 24 × 25 mm body and 20 × 20 × 23 mm internal chamber suit compact holder layouts and manual sample handling.

In Stock

SKU: C202CE2 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C202CE2 is a JGS1 quartz rectangular sample cell for UV/Vis spectroscopy with a 20 mm optical path and a Two-Way Light layout. Its open-top chamber gives direct access for filling, rinsing and visual inspection from above, while the compact 24 × 24 × 25 mm body helps when holder space is limited or body size matters in your setup.

Path Length: 20 mm
Cell Type: Rectangular Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	20 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	24 × 24 × 25 mm
Cell Body Dimensions	24 × 24 × 25 mm
External Dimensions Scope	Body Only
Body Height	25 mm
Internal Dimensions	20 × 20 × 23 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Open Top
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C202CE2 when your method calls for a 20 mm transmission path and you want a straightforward rectangular cell body with top access to the sample chamber. The 20 × 20 × 23 mm internal space is easy to load manually, and the square external format is useful when you need to check holder seating and side clearance around the cell body.

What makes this option different

20 mm optical path for methods built around this transmission length.
Two-Way Light layout for transmission through opposite optical faces in a standard straight-through measurement geometry.
Open-top sample chamber for direct filling, rinsing and viewing from above during setup.
20 × 20 × 23 mm internal chamber for a broad rectangular sample region that is easy to access with pipettes or rinse liquid.
24 × 24 × 25 mm body size for checking holder fit and side clearance in compact installations.
JGS1 quartz construction for UV/Vis use within the stated wavelength range of 200-2500 nm.
Fused integrated construction: rinse the joined body through its open top and handle it as an assembly rather than separating optical plates.

Using this cell

Fill the chamber from the top and make sure the liquid level covers the beam path used by your instrument. Before measurement, remove visible bubbles and keep the same cell orientation for blank and sample when your method depends on repeatable positioning.

The open chamber is practical for manual loading and rinsing, but it also means you should plan your own handling around splash control, evaporation and contamination during use. If your process depends on a cover or other closure arrangement, check that point before ordering.

First-use check

Inspect the optical faces and body edges for shipping damage or visible residue.
Rinse the chamber with a suitable liquid for your process before first use.
Place the cell in the holder and verify that the beam passes through the intended opposite faces.
Run a blank and confirm that your fill level fully covers the working beam.

Fit and optical alignment

The stated 24 × 24 × 25 mm dimensions describe the cell body. Use them to check holder seating, surrounding clearance and how the body will sit in your fixture. The 20 mm optical path should be matched to the method you intend to run, rather than inferred from another cell length in the same family.

Z Height is not stated for this SKU, so instrument fit should not be assumed from body height alone. If your holder or spectrometer requires a defined beam-center height, confirm that separately before purchase. Capacity is also not released here as a settled customer specification, so if fill volume is critical, check beam coverage under your own operating condition.

Solvents and cleaning

This quartz cell is intended for UV/Vis use, but the exact chemical limits for this SKU are not stated here. If your samples or cleaning steps involve aggressive chemicals, elevated temperature or long contact time, check those conditions for this exact cell before ordering.

The supplier describes this family with a fused integrated construction term. For general quartz cuvette construction guidance, see fabrication options. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

The listed price is for 1 C202CE2 rectangular sample cell. Confirm any required closure or additional accessories before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, optical path length, windows, closures, or other fit-related requirements. Send a labelled sketch or drawing together with your holder details, beam-height requirement, sample conditions, and target quantity. You can contact us here and mention part number C202CE2.