(C302CR6) Quartz Rectangular Sample Cell, 30 mm Path

Weight	100 g

SKU: C302CR6

Original price was: $104.00.Current price is: $94.00.

In Stock

C302CR6 is a JGS1 quartz rectangular sample cell with a 30 mm optical path, a Two-Way Light transmission layout and an open-top chamber for direct filling. Its 30 × 30 × 33 mm internal chamber sits in a 34 × 34 × 35 mm body-only format for UV/Vis work where chamber width and top access both matter. Sold as 1 cell.

In Stock

SKU: C302CR6 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C302CR6 is a JGS1 quartz rectangular sample cell for UV/Vis spectroscopy with a 30 mm optical path and an open-top sample chamber. The square 30 × 30 × 33 mm internal region gives direct access from above, while the Two-Way Light layout keeps the optical path focused on straightforward transmission through opposite faces.

This option suits methods that are built around a 30 mm path and a broad sample region rather than a narrow cuvette profile. Its fused integrated construction is the supplier’s stated build term for this SKU family, and the compact 34 × 34 × 35 mm body-only size helps you check holder space around the cell itself.

Path Length: 30 mm
Cell Type: Rectangular Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	30 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	34 × 34 × 35 mm
Cell Body Dimensions	34 × 34 × 35 mm
External Dimensions Scope	Body Only
Body Height	35 mm
Internal Dimensions	30 × 30 × 33 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Open Top
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C302CR6 when you need a rectangular quartz cell that is easy to fill from the top and easy to rinse between runs, while still keeping a defined 30 mm transmission path. The wide chamber is useful when your sample handling matters as much as the optical length, for example when you are pouring directly, using a pipette with more room at the opening, or working with a sample region that should remain visually accessible during loading.

What makes this option different

Open-top access leaves the sample chamber directly reachable for filling, rinsing and visual checking from above.
30 mm optical path suits methods written for this stated transmission length without moving to a taller or more complex cell style.
Two-Way Light layout keeps the optical use focused on one transmission axis through opposing faces, which is often the practical choice when side access is not needed.
30 × 30 × 33 mm internal chamber provides a broad sample region that is easier to access than a narrow rectangular or micro-volume format.
34 × 34 × 35 mm body-only dimensions help you check holder footprint and overhead clearance around the cell body itself.
Fused integrated construction is the stated build style for this SKU family, giving a fixed assembled body rather than a demountable plate-style sample space.
2 mm wall thickness is specified for this option.

Using this cell

Fill the chamber from the top and seat the cell so the beam passes through a fully covered, bubble-free sample region. Because the chamber stays open during loading, you can inspect the liquid surface and wall condition before measurement and rinse the cell directly between samples.

Keep handling on the non-optical outer surfaces where possible. For repeatable readings, use the same orientation for blank and sample measurements and make sure any meniscus, bubbles or residue are out of the beam path.

First-use check

Inspect the chamber opening and optical faces for chips, dust or fingerprints.
Place the empty cell in your holder to confirm stable seating and overhead access.
Rinse with a suitable liquid before first use.
After filling, confirm that the transmission path crosses a clean, fully covered sample region.

Fit and optical alignment

The stated 34 × 34 × 35 mm size applies to the cell body only. Check that your holder supports this body shape securely and still leaves enough space above the opening for pipetting, pouring or cleaning.

Z Height is not specified for this item, so fixed-beam instruments should be checked for beam position against the seated sample region. The nominal volume is not settled here, so selection should be based on the 30 mm path, the square chamber geometry and the body size rather than an assumed capacity figure.

Solvents and cleaning

This quartz cell is listed for UV/Vis use across 200–2500 nm, but the exact chemical limits of this assembled cell are not established in the available data for this SKU. If your process uses aggressive samples, rinse solvents or unusual cleaning chemicals, check suitability for the complete use condition before routine work.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with suitable non-abrasive tissue. For fabrication background and general care guidance, see MQ Cuvette Fabrication Glossary.

Included with this option

Sold as 1 cell. The package is not established as including a closure or other accessories.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions related to dimensions, path length, chamber geometry, windows, Z Height, closures and related tolerances. Send a labelled drawing or sketch, your holder or instrument details, the critical dimensions and your sample conditions. Discuss your requirements and reference C302CR6.