(C302CE9) Quartz Rectangular Sample Cell, 30 mm Path

Weight	100 g

SKU: C302CE9

Original price was: $170.00.Current price is: $153.00.

In Stock

C302CE9 is a JGS1 quartz rectangular sample cell with a 30 mm optical path, a broad 30 × 30 × 33 mm internal chamber and an included top closure. Its two-face transmission layout suits UV/Vis measurements taken straight across opposite sides, while the covered opening helps with routine filling and handling. Sold as 1 cell.

In Stock

SKU: C302CE9 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C302CE9 is a JGS1 quartz rectangular sample cell for UV/Vis work with a 30 mm optical path and a wide square sample chamber. The included top closure makes this option useful when you want direct access for filling and viewing the sample region, then a covered opening for routine handling. In a compact 34 × 34 × 35 mm body, it combines a short outside format with a much broader chamber than a narrow cuvette body.

Path Length: 30 mm
Cell Type: Rectangular Sample Cell
Closure Type: Flat Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	30 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	34 × 34 × 35 mm
Cell Body Dimensions	34 × 34 × 35 mm
External Dimensions Scope	Body Only
Body Height	35 mm
Internal Dimensions	30 × 30 × 33 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Flat Lid
Closure Included	Yes
Wall Thickness	2 mm

Choose this option

Choose C302CE9 when your method needs a 30 mm transmission path and you want a wider rectangular chamber rather than a slim standard-format cell. The 30 × 30 × 33 mm internal space gives open access for filling, rinsing and observing the sample region from above, while the supplied closure covers the opening during setup and measurement. This two-face optical layout is the straightforward choice when your instrument sends the beam across opposite sides of the cell rather than requiring side access.

What makes this option different

30 mm optical path for methods specified at this transmission length.
Two-Way Light layout for direct transmission across two opposite faces, without extra side optical access to accommodate.
Included top closure so the broad open chamber can be covered after filling and positioning.
30 × 30 × 33 mm internal chamber gives a wide sample region with easy top access.
34 × 34 × 35 mm body-only size keeps the outside form compact relative to the chamber width.
Fused integrated construction is the stated assembled build for this SKU, relevant when you plan rinsing and routine handling of the complete cell rather than selecting by a separate MQ fabrication grade.
2 mm wall thickness is specified for this option.

Using this cell

Fill from the top opening and make sure the illuminated region is fully covered before measurement. The square chamber gives more room to pour or pipette into the cell than a narrow cuvette body, which can make setup easier when you need to watch the liquid surface and remove visible bubbles.

Use the same orientation for blank and sample measurements so the beam passes through the same two opposing faces each time. The closure is useful for covering the opening during normal handling, but no sealing or pressure rating is stated for this cell.

First-use check

Inspect the optical faces, chamber opening and edges for dust or shipping residue.
Test the body fit in your holder and confirm top clearance for the closure.
Rinse the chamber with a suitable liquid before first use.
After filling, check that the beam region is fully covered and free of visible bubbles.

Fit and optical alignment

The listed 34 × 34 × 35 mm dimensions apply to the cell body only, not the overall height with the closure in place. Leave clearance above the body for the supplied top piece when checking fit in your holder or sample compartment.

Z Height is not stated for this SKU, so beam-center fit should be checked against your holder or instrument geometry before purchase if your setup depends on a defined beam height. Select this cell by the stated path length and chamber geometry rather than by an assumed working volume.

Solvents and cleaning

This cell is supplied in quartz for UV/Vis use, and the source describes the body as fused integrated construction. For ordinary use, that means treating the complete assembled cell as the wetted item when choosing rinses and cleaning steps, rather than assuming a separate fabrication grade or chemical rating from a family label alone.

The exact chemical limits of this SKU are not established here, so aggressive samples, rinse solvents and cleaning routines should be checked against your full liquid conditions before routine use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces gently with suitable non-abrasive tissue. For general fabrication background, see MQ Cuvette Fabrication Glossary.

Included with this option

Sold as 1 cell. A closure is included. Additional package contents are not specified here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions related to dimensions, path length, chamber geometry, windows, Z Height, closures or related tolerances. Send a labelled drawing or sketch, your holder or instrument details, the critical dimensions and tolerances, and your sample conditions. Discuss your requirements and reference C302CE9.