(C302CA10) Glass Standard Cuvette, 30 mm Path, 10.5 mL

Weight	100 g

SKU: C302CA10

Original price was: $32.00.Current price is: $29.00.

In Stock

C302CA10 is a glass standard cuvette for visible absorbance methods that use a 30 mm optical path over 350–2000 nm. Its open-top format gives direct access for filling and visual checking, and the nominal capacity is 10.5 mL.

In Stock

SKU: C302CA10 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C302CA10 is a glass standard cuvette for visible absorbance measurements that use a 30 mm optical path. The open-top body gives direct access to the sample region for filling, checking and emptying, while the 10.5 mL nominal capacity suits this longer-path standard format rather than a micro-volume design. This MQ listing is sold as a pack of four.

Path Length: 30 mm
Sample Volume (Nominal): 10.5 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Path Length	30 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	2000 nm
Sample Volume (Nominal)	10.5 mL
External Dimensions	32.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	32.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Glass
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C302CA10 when your method calls for a 30 mm path in the visible range and you want uncomplicated top access to the sample. The rectangular open body is practical for routine pipetting or pour filling, and the longer optical path should be selected for methods written around that path length rather than assumed from a standard 10 mm cell format.

What makes this option different

30 mm optical path suits methods that are specified around a longer transmission distance through the sample.
Open-top access lets you fill, inspect and empty the cell directly from above without a threaded port or fixed top fitting.
Two-Way Light layout matches straight-through visible absorbance use through the main optical faces.
10.5 mL nominal capacity identifies a full nominal cell volume for this format, not a minimum working fill value.
Glass construction is listed for 350–2000 nm work, so this option is for visible-range methods rather than UV transmission.
Fused integrated construction indicates an assembled rigid glass body rather than a loose multi-part sample chamber, which is useful for routine filling, rinsing and handling of a standard open cuvette shape.

Using this cell

Fill the cell from the top and make sure the liquid level covers the measurement beam during use. Before placing it in the holder, check the optical region for bubbles, droplets or particles, and keep the same orientation for blank and sample measurements.

Handle the cuvette by the non-optical surfaces where possible. The stated 10.5 mL value is the nominal capacity of the cell, so it should not be treated as the minimum working volume for your method.

First-use check

Before first use, inspect the optical faces and top opening for chips, residue or handling marks. Rinse as appropriate for your method, place the cell in the holder, and run a blank in the same orientation planned for sample measurements.

Fit and optical alignment

The recorded dimensions, 32.5 × 12.5 × 45 mm, apply to the uncapped cell body. Use these body dimensions to check holder space for the bare cuvette, and leave additional clearance above the opening because the installed height with a supplied closure is not listed.

Z Height is not provided for this SKU. If your instrument or holder depends on a defined beam-center height, check that requirement before ordering instead of relying on the outer body dimensions alone.

Solvents and cleaning

This glass cuvette is specified for visible absorbance use, but chemical limits for the exact cell-and-closure assembly are not listed here. If your samples or cleaning routine involve aggressive chemicals, check compatibility for the full assembly before use.

For routine care, use cleaning methods suitable for laboratory glassware and avoid abrasive tools on the optical faces. For general background on cuvette constructions, see fabrication options.

Included with this option

The listed price covers 4 C302CA10 glass cuvettes, with accompanying closures and a storage box.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom requirements related to dimensions, optical path length, sample volume, windows or Z Height, closures and fabrication. Send a dimensioned drawing or labelled sketch together with your instrument or holder details, sample conditions and quantity requirements. You can contact us here and reference part number C302CA10.