(C302CA11) Glass Standard Cuvette, 30 mm Path, 10.5 mL

Weight	100 g

SKU: C302CA11

Original price was: $62.00.Current price is: $56.00.

In Stock

C302CA11 is a glass standard cuvette for visible absorbance methods that use a 30 mm optical path. Its open-top body and 10.5 mL nominal capacity suit direct filling, rinsing and routine bench measurement in the 350–2000 nm range. Sold per pack of 10 cuvettes.

In Stock

SKU: C302CA11 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C302CA11 is a glass standard cuvette for visible absorbance measurements with a 30 mm optical path. The longer path, open-top access and 10.5 mL nominal capacity make it a practical choice when your method is written around this geometry and you want straightforward filling and rinsing at the bench. It is intended for use over 350–2000 nm.

Path Length: 30 mm
Sample Volume (Nominal): 10.5 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Path Length	30 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	2000 nm
Sample Volume (Nominal)	10.5 mL
External Dimensions	32.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	32.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Glass
Closure Type	Lid
Closure Included	No
Opening Configuration	Open Top

Choose this option

Choose C302CA11 when your method specifically calls for a 30 mm path in a rectangular glass cuvette rather than a capped or flow-through format. The open top gives direct access for pipetting and cleaning, while the stated nominal capacity helps you plan sample preparation for a full-height liquid column in this longer-path cell.

What makes this option different

30 mm optical path for methods that are written around this longer transmission distance.
Open-top body for direct filling, emptying and rinsing without a stopper or cap assembly.
Two-Way Light layout for transmission measurements through opposing optical faces.
10.5 mL nominal capacity for routine sample loading in this path-length format.
Glass construction for visible-range work over the stated 350–2000 nm range.

Using this cell

Fill from the top and make sure the liquid level fully covers the beam area used by your instrument. For consistent blank and sample readings, keep the same cell orientation between runs and remove visible bubbles before measurement.

This option is supplied without a lid, so it suits workflows where open-top handling is acceptable during transfer and measurement. If your liquid is especially prone to splashing or needs covered handling, check whether an open cell matches your procedure before ordering.

First-use check

Inspect the optical faces for chips, residue or scratches before first use. Rinse with a cleaning liquid that suits your process, then place the empty cell in the holder and confirm that the beam passes through the intended faces without obstruction.

Fit and optical alignment

The recorded external size for the uncapped cell body is 32.5 × 12.5 × 45 mm. Use these body dimensions to check holder clearance and the working space you need above the opening for pipettes or rinsing.

Z Height is not listed for this SKU. If your instrument or holder depends on a fixed beam-center height, do not judge fit from overall body height alone.

Solvents and cleaning

This glass cuvette is described for visible-range use. The source also presents general acid/alkali resistance wording, but the exact chemical limits for this SKU are not established here, so treat chemical use and cleaning conditions with care.

Avoid abrasive cleaning that could mark the optical faces. If your application involves demanding chemical conditions or you need help choosing a different cell construction, see fabrication options or contact us with your sample details.

Included with this option

10 cuvettes per listed price unit. Supplied without a lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For a different path length, body format or material, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are reviewed separately from this listed glass cuvette, and feasibility, quantity, price and production time are confirmed in the quotation.