(C102TR8) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C102TR8

Original price was: $99.00.Current price is: $90.00.

In Stock

C102TR8 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity. It uses an internal-thread capped format and includes a PTFE closure. Sold as 1 cuvette.

In Stock

SKU: C102TR8 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102TR8 is a JGS1 quartz screw-top cuvette for straight-through optical measurements with a 10 mm path and a covered sample chamber. Its 3.5 mL nominal capacity, Two-Way Light layout and supplied PTFE closure make it a practical choice when you want a capped quartz cell in a familiar full-size format. This listing is sold as 1 cuvette.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Overall Height without Closure	45 mm
Body Height	45 mm
Overall Height with Closure	55 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C102TR8 when you need a 10 mm quartz cuvette with a threaded cap rather than an open-top chamber. The capped format is useful when you want to cover the sample during handling and measurement, while the Two-Way Light layout keeps the optical path focused on straight-through transmission across two faces. The included PTFE closure also means the working lid is part of this sale item.

What makes this option different

10 mm optical path for methods built around that standard transmission length.
Two-Way Light layout for straight-through measurement across two optical faces.
Internal-thread screw-top format with a PTFE closure included.
3.5 mL nominal capacity in a full-size quartz body.
12.5 × 12.5 mm base with 45 mm uncapped height and 55 mm total height when capped.

Using this cell

Fill the cuvette so the liquid covers the beam area used by your instrument, then fit the PTFE closure before measurement. Keep the same orientation for blank and sample readings, and handle the cell by the non-optical surfaces where possible.

The 3.5 mL figure is the nominal cell capacity, not a stated minimum working volume. A capped format can be helpful when moving filled samples between preparation and measurement steps, but this listing does not state pressure-rated or gas-tight performance.

First-use check

Inspect the optical faces for dust, handling marks or shipping residue.
Rinse with a cleaning liquid that is suitable for your sample and the full cell-and-closure assembly.
Place the cuvette in the holder with a blank or reference liquid and check seating, beam coverage and cap clearance.

Fit and optical alignment

The base footprint is 12.5 × 12.5 mm, with a 45 mm height to the uncapped top and 55 mm overall height with the closure fitted. These dimensions help you check holder seating and the vertical clearance needed above the cell for the cap.

Z Height is not stated for this item, so instrument fit should not be assumed from outside size alone. If your holder, beam position or autosampler depends on a defined beam-center height, please confirm that point before ordering.

Solvents and cleaning

Quartz is widely used for optical cells, but the exact chemical limits for this assembled screw-top cuvette are not stated here. Check that your sample, rinse solvent and cleaning routine are suitable for the complete assembly, including the PTFE closure, before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe the optical faces gently with non-abrasive optical tissue. For fabrication background, see MQ Cuvette Fabrication Glossary.

Included with this option

Supplied as 1 quartz screw-top cuvette with a PTFE closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows, Z Height, closures and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Discuss your requirements and quote part number C102TR8.