(C102TR9) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C102TR9

Original price was: $198.00.Current price is: $179.00.

In Stock

C102TR9 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity. The included PTFE closure gives you a covered sample chamber in a standard square-body format. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C102TR9 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102TR9 is a JGS1 quartz screw-top cuvette for straight-through measurements that use a 10 mm optical path. Its Two-Way Light layout, 3.5 mL nominal capacity and included PTFE closure make it a practical choice when you want a covered sample chamber without moving away from a familiar square cuvette format. This option is supplied as a pack of 2 cuvettes.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Overall Height without Closure	45 mm
Body Height	45 mm
Overall Height with Closure	55 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C102TR9 when your method is built around a 10 mm transmission path and you want the sample covered after filling. The screw-top format gives direct top access for loading liquid samples, while the 3.5 mL nominal capacity suits routine measurements that do not require a micro-volume cell. A pack of 2 is convenient when you want one cuvette for sample and one for blank, or two identical cells prepared together.

What makes this option different

10 mm optical path for methods specified around that path length.
Two-Way Light layout for straight-through transmission across two optical faces.
PTFE closure included so the sample can be covered after filling.
Pack of 2 cuvettes under this listing.

Using this cell

Fill from the top opening, then fit the closure before measurement if your routine calls for the sample to be covered. Keep the optical faces clean and check for droplets or bubbles in the beam area before placing the cuvette in the instrument.

For consistent blank and sample work, keep the same orientation each time and handle the cell by the non-optical sides where possible. The closure covers the opening during handling and measurement, but this listing does not state a pressure rating or gas-tight performance.

First-use check

Inspect both cuvettes for dust, residue or visible marks on the optical faces.
Rinse with a cleaning liquid that is suitable for your sample and for the full cell assembly.
Test holder fit and top clearance before running your method.
Run a blank first and verify stable placement in the intended orientation.

Fit and optical alignment

The cuvette has a 12.5 × 12.5 mm base, a 45 mm body height and a 55 mm overall height with the closure fitted. These are the key dimensions to check against your holder and any top clearance around the cap area.

Z Height is not stated for this model. If your instrument depends on a defined beam-center height, confirm that requirement before ordering rather than relying on the outside dimensions alone.

Solvents and cleaning

Quartz is widely used for optical cells, and the closure on this item is PTFE. The exact chemical limits for this assembled screw-top cuvette are not stated here for specific solvents, concentrations or temperatures, so check that your sample and cleaning routine are suitable for the full cell and closure assembly.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe the optical faces gently with non-abrasive optical tissue. For fabrication background, see MQ Cuvette Fabrication Glossary.

Included with this option

Supplied as a pack of 2 quartz screw-top cuvettes with PTFE closures included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Discuss your requirements and quote part number C102TR9.