(C102CR15) Quartz Micro Cuvette, 10 mm Path, 700 µL

Weight	30 g

SKU: C102CR15

Original price was: $72.00.Current price is: $65.00.

In Stock

C102CR15 is a quartz micro cuvette for UV/Vis work with a 10 mm optical path, 700 µL nominal capacity and a 2 mm sample region. Its open-top body supports direct filling, and the sale unit is 1 cuvette with a lid included.

In Stock

SKU: C102CR15 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CR15 is a quartz micro cuvette for UV/Vis spectroscopy with a 10 mm optical path, Two-Way Light layout and 700 µL nominal capacity. The 2 mm sample region gives you a mid-width measurement zone in the same compact body format, which can be useful when you want more room in the sample area than the narrowest option while keeping the same basic footprint. It is sold as 1 cuvette per price unit, with a lid included.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top (Cell Body)
Detection Channel Width	2 mm

Choose this option

Choose C102CR15 when you need a standard 10 mm path in a compact quartz micro cuvette and want a moderate sample-region width. The 700 µL nominal capacity and 2 mm sample region help you balance fill handling and beam coverage without moving to the widest channel in this body style. The stated 12.5 × 12.5 × 45 mm size applies to the uncapped body, which is useful for holder checks before you consider lid clearance above the cell.

What makes this option different

2 mm sample region for a moderate illuminated zone at the measurement area.
700 µL nominal capacity in a compact micro cuvette body.
10 mm optical path with Two-Way Light for straight-through UV/Vis measurement.
Open-top quartz body with lid included for direct loading and covered handling between steps.

Using this cell

Fill from the open top and make sure the sample fully covers the illuminated region before measurement. A consistent fill routine, stable seating and good bubble control matter for repeatable use.

Keep the same orientation for blank and sample measurements, and remove any droplets or residue from the outside optical faces before placing the cell in the holder. The 700 µL value is the nominal capacity of the cell, not a minimum working volume.

First-use check

Inspect the optical faces, rinse the cell with a cleaning liquid suitable for your method, and test the fit in the holder. Then run a trial fill to confirm that the sample region is fully covered and free of trapped bubbles.

Fit and optical alignment

The uncapped cell body measures 12.5 × 12.5 × 45 mm. Use those body dimensions to check whether the cell will seat correctly in your holder, but allow additional top clearance for the lid because the closed height is not stated here.

Z Height is not specified for this option. If your instrument uses a fixed beam position or a tightly defined holder geometry, check alignment before ordering rather than relying on body height alone.

Solvents and cleaning

This SKU has a quartz body and a supplier-stated powder-fused construction term, but exact chemical limits for the full assembly are not specified here. If your method uses aggressive liquids or dedicated cleaning solvents, review compatibility for both the cell and lid arrangement before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Rinse after use and wipe the exterior optical faces gently with non-abrasive optical tissue. For general background on MQ cuvette constructions, see https://machinedquartz.com/fabrication-method-of-cuvettes/.

Included with this option

Supplied as 1 quartz micro cuvette with a lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review related JGS1 quartz custom requirements involving dimensions, path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch, your holder or instrument information, the critical dimensions and tolerances, and your sample conditions. Discuss your requirements and reference C102CR15.