(C102CE8) Quartz Micro Cuvette, 10 mm Path, 700 µL

Weight	30 g

SKU: C102CE8

Original price was: $179.00.Current price is: $162.00.

In Stock

C102CE8 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy, combining a 10 mm optical path with a 700 µL nominal capacity in a compact body. Its 2 mm sample-region width and included PTFE lid help you plan both filling and beam placement for limited-volume measurements. Supplied as 1 cuvette.

In Stock

SKU: C102CE8 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CE8 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy when you want a standard 10 mm optical path in a smaller-volume cell. This option combines a 700 µL nominal capacity, a 2 mm sample-region width and Two-Way Light transmission, with an included PTFE lid for covered sample handling. The stated wavelength range for this quartz option is 200–2500 nm.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	2 mm

Choose this option

Choose C102CE8 when your method uses a 10 mm straight-through path but you prefer a micro cuvette body instead of a larger full-volume cell. The 700 µL nominal capacity suits small prepared samples, while the 2 mm sample-region width is worth checking when your beam footprint or fill height is more critical than with a broader chamber.

What makes this option different

10 mm optical path: keeps the familiar straight-through UV/Vis path length in a micro cuvette format.
2 mm sample region: a narrow stated channel width that matters when planning beam placement and sample coverage.
700 µL nominal capacity: suitable for limited-volume measurements without moving to a full-size cuvette body.
Two-Way Light configuration: intended for direct transmission measurements rather than side-access optical layouts.
PTFE lid included: adds covered access for routine handling, while closure performance should be checked in your own procedure if sealing matters.
Compact uncapped body: the listed 12.5 × 12.5 × 45 mm dimensions apply to the bare cell body for holder and clearance planning.

Using this cell

Fill the cell so the illuminated region is fully covered during measurement. With a 2 mm sample region, careful loading helps avoid bubbles or droplets crossing the beam, and it is good practice to keep the same orientation for blank and sample runs.

The PTFE lid is useful for covered routine handling, but it should be seated gently rather than forced. The nominal 700 µL figure describes the model capacity, not a minimum working volume, so very low fill procedures should be checked in the actual instrument before routine use.

First-use check

Before first use, inspect the optical faces and lid contact area for dust, fingerprints or packing residue. Insert the cuvette in the intended holder, verify that it seats squarely, then run a blank to confirm that the beam passes cleanly through the intended sample region.

Fit and optical alignment

The uncapped cell body measures 12.5 × 12.5 × 45 mm. Use those dimensions to check holder seating, and allow extra space above the cell because the installed height with the lid is not stated here.

Z Height is not specified for this SKU, so instrument fit should not be assumed from outer size alone. The 2 mm sample-region width is also relevant when checking whether your beam passes through the intended part of the filled sample.

Solvents and cleaning

This cuvette is listed under Molded 83, with the exact source describing the joining method as optical contact. For customer selection, this fabrication category is commonly chosen for methods that may involve organic-solvent handling, but the exact chemical limits for this specific assembled cuvette are not established here.

Choose sample-contact and cleaning conditions for the full assembly, including the PTFE lid. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 quartz micro cuvette with a PTFE lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication or tolerance requirements. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements and quote part number C102CE8.