(C102SR32) Quartz Micro Cuvette, 10 mm Path, 1.4 mL

Weight	30 g

SKU: C102SR32

Original price was: $143.00.Current price is: $129.00.

In Stock

C102SR32 is a quartz micro cuvette for UV/Vis work with a 10 mm optical path, Two-Way Light layout and 1.4 mL nominal capacity. Its stopper closure and 4 mm sample-region width suit methods that need a covered cell with a defined narrow measurement section. Sold as 1 cuvette per price unit; closure included.

In Stock

SKU: C102SR32 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102SR32 is a quartz micro cuvette for UV/Vis spectroscopy with a 10 mm optical path and a 1.4 mL nominal capacity. This option combines a stopper closure with a 4 mm sample region, giving you a covered micro cell with a defined transmission section rather than a broad sample chamber. The quartz body is specified for use from 200 to 2500 nm.

Path Length: 10 mm
Sample Volume (Nominal): 1.4 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	4 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
Material	Quartz
Closure Type	Stopper
Closure Included	Yes
Detection Channel Width	4 mm

Choose this option

Choose C102SR32 when you need a 10 mm path quartz cell but want a micro-format body with a 1.4 mL nominal capacity and a covered opening. The 4 mm sample-region width is central to how this version is used: it helps you plan filling and beam placement around a narrower measurement zone. It is suited to UV/Vis measurements, including volatile-liquid routines where a stopper format is preferred for handling.

What makes this option different

10 mm optical path for UV/Vis methods built around this standard transmission length.
1.4 mL nominal capacity in a micro cuvette format.
4 mm sample-region width for a defined, relatively narrow illuminated section.
Two-Way Light layout for transmission measurement through the stated optical path.
Stopper closure included as part of this exact cuvette option.
Quartz body, 200–2500 nm for the stated UV/Vis wavelength range.

Using this cell

Fill the cell so the beam passes fully through liquid in the sample region, and remove bubbles or droplets before measurement. Use a consistent orientation for blank and sample, and seat the stopper carefully after filling.

The stated 1.4 mL is the nominal capacity of the cell, not a minimum working volume. If you plan to run below full fill, verify that the liquid level still covers the beam path cleanly in your actual holder and measurement position.

First-use check

Inspect the optical faces and stopper after unpacking.
Rinse with a liquid suitable for your method and confirm clean filling.
Test the cell in the holder with your intended orientation.
Run a blank to confirm full beam coverage through the filled sample region.

Fit and optical alignment

The 4 mm sample-region width should be matched to your beam footprint and measurement geometry. This matters when your instrument uses a fixed beam position or when you need the illuminated section to remain within a defined narrow part of the cell.

Z Height is not established for this SKU, and external fit dimensions are not released here as customer specifications. Do not assume holder compatibility from the 10 mm path alone; check the holder type or beam-center requirements if your setup has limited clearance.

Solvents and cleaning

This quartz cell is specified for UV/Vis use, but the chemical limits of the complete stopper-equipped assembly are not established here. If your method involves aggressive solvents or specific cleaning agents, review the actual liquid, concentration, temperature and contact time for your process. For general fabrication background across cuvette types, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue and a suitable laboratory cleaning liquid for your process.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with your instrument or holder details, the critical dimensions, the working wavelength range and your sample conditions. Prototype batches typically involve 2–4 cells; feasibility, final specifications, quantity, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C102SR32.