(C104CS98) Quartz Ultra-Micro Cuvette, 10 mm Path, 100 µL

Weight	30 g

SKU: C104CS98

Original price was: $175.00.Current price is: $158.00.

In Stock

C104CS98 is a JGS1 quartz ultra-micro cuvette with a 10 mm optical path, 100 µL nominal capacity and Four-Way Light geometry for fluorescence spectroscopy. Its open-top body gives direct access for filling and visual inspection before measurement. Sold as 1 cuvette.

In Stock

SKU: C104CS98 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS98 is a JGS1 quartz ultra-micro cuvette with a 10 mm optical path and 100 µL nominal capacity for fluorescence spectroscopy. The Four-Way Light design and open-top body make it a practical choice when you need side optical access around a compact sample region and want to load the sample directly from above.

This option suits laboratory work built around a small-volume cell rather than a closed cuvette format. The open top helps with pipette loading and visual checking before the run, while the 100 µL nominal capacity gives a clear target size for routine small-volume preparation.

Path Length: 10 mm
Sample Volume (Nominal): 100 µL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	100 µL
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C104CS98 when you need a 10 mm path in an ultra-micro format and want direct top access for loading the sample. The 100 µL nominal capacity and Four-Way Light layout make it suitable for fluorescence setups that depend on a compact sample chamber with optical access from multiple sides.

What makes this option different

10 mm optical path in an ultra-micro cuvette format.
100 µL nominal capacity for small-volume sample handling.
Four-Way Light geometry for optical access from four sides around the sample region.
Open-top cell body for direct filling and inspection before measurement.
JGS1 quartz material for fluorescence spectroscopy use.

Using this cell

Fill the cell carefully from the open top and make sure the illuminated region is covered during measurement. Avoid bubbles, droplets and dried residue on the optical faces, and keep the same seating direction for both blank and sample so the optical arrangement stays consistent.

Because this is an open-top body, handle it as a bench-loaded cell rather than a sealed assembly. The stated 100 µL is the nominal capacity for this option and should not be treated as a guaranteed minimum working volume.

First-use check

Before your first measurement, inspect the cell for clean optical faces and confirm that it sits securely in the holder without tilt. Run a blank in the same orientation you will use for the sample, and confirm that the filled sample covers the beam path without trapped air.

Fit and optical alignment

Check your holder and sample compartment before ordering. This ultra-micro geometry must fit the available clearance, and the instrument beam must pass through the intended sample region rather than a position assumed from path length or nominal volume alone.

No released Z Height value is provided for this option. If your instrument has a fixed beam height or a tight holder geometry, send the holder model or a drawing with the available clearance so the fit can be reviewed before purchase.

Solvents and cleaning

Quartz is widely used in optical cells, but the exact chemical limits for this assembled cuvette are not established here. If your method involves aggressive solvents, long contact times or heated cleaning, check the full sample and cleaning conditions before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean optical faces gently with suitable non-abrasive laboratory or optical wipes. For general fabrication background, see MQ Cuvette Fabrication Glossary.

Included with this option

Supplied as 1 cuvette per sale. No closure or additional accessory is specified for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with your holder or instrument details, the critical dimensions, sample conditions and target timing. You can contact us about a custom cuvette project and reference C104CS98.