(C1002CC) Glass Rectangular Sample Cell, 100 mm Path, 60 mL

Weight	100 g

SKU: C1002CC

Original price was: $95.00.Current price is: $86.00.

In Stock

C1002CC is a glass rectangular sample cell with a 100 mm optical path, open-top filling and 60 mL nominal capacity. It is intended for work within the stated 350–800 nm range and gives direct access to the sample during filling and cleaning. Sold as 1 cuvette per listed MQ sale.

In Stock

SKU: C1002CC Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C1002CC is a glass rectangular sample cell for measurements within the stated 350–800 nm range. It combines a 100 mm optical path with an open-top body and 60 mL nominal capacity, making it a practical choice when your method needs a long light path and straightforward access to the sample chamber.

Path Length: 100 mm
Sample Volume (Nominal): 60 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	100 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	800 nm
Sample Volume (Nominal)	60 mL
External Dimensions	104 × 20 × 40 mm
Cell Body Dimensions	104 × 20 × 40 mm
External Dimensions Scope	Body Only
Material	Glass
Fabrication Method	Standard 80
Opening Configuration	Open Top
Wall Thickness	2 mm

Choose this option

Choose C1002CC when your method is built around a 100 mm rectangular cell and you want direct top access for filling, level checking and cleaning. Its glass body and adhesive-bonded Standard 80 construction suit routine room-temperature water-based samples and buffers better than methods that require aggressive solvent cleaning or heated chemical exposure.

What makes this option different

100 mm optical path for methods that require a long rectangular transmission length.
Open-top access for direct filling, pipetting and visual checking of the liquid level.
60 mL nominal capacity for larger sample volumes in one cell.
350–800 nm stated range for measurements carried out within that wavelength span.

Using this cell

Fill the cell from the top and make sure the liquid covers the beam region used by your instrument. Remove visible bubbles from the optical path area and keep the same orientation for blank and sample runs.

Handle the cell by the non-optical surfaces where possible. Because this is an open-top design, it is best used where direct access to the sample is acceptable and where splashing or evaporation will not disturb the measurement.

First-use check

Inspect the optical faces for chips, scratches or handling residue.
Rinse with a suitable cleaning medium for your process.
Test the cell in the intended holder before preparing analytical samples.
Run a blank and confirm that the beam passes cleanly through the intended faces.

Fit and optical alignment

The stated body dimensions are 104 × 20 × 40 mm, and they apply to the body only. Use them to check holder clearance and compartment space, especially for long-path arrangements where the overall body length matters.

Z Height is not stated for this option. If your holder or spectrometer depends on a defined beam-center height, check that point before purchase rather than assuming fit from body size alone.

Solvents and cleaning

This adhesive-bonded glass cuvette is listed as Standard 80. That makes it a practical choice for routine room-temperature water-based samples and buffers. A chemical compatibility range is not specified for this option, so discuss the exact liquid, concentration, temperature and contact time before using organic solvents, aggressive reagents or heated cleaning.

Keep hydrofluoric acid away from glass. Avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 cuvette.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom requirements related to dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication. Send a dimensioned drawing or labelled sketch, together with your holder or instrument details, sample conditions and target quantity, through our contact page and reference C1002CC.