(C102CE11) Glass Micro Cuvette, 10 mm Path, 700 µL, Pack of 2

Weight	30 g

SKU: C102CE11

Original price was: $34.00.Current price is: $31.00.

In Stock

C102CE11 is a glass micro cuvette for visible absorbance measurements with a 10 mm optical path, a 700 µL nominal capacity and a 2 mm sample-region width in a Two-Way Light layout. A PTFE closure is included. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C102CE11 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CE11 is a glass micro cuvette for visible absorbance work when you need a 10 mm optical path in a compact micro format. This option combines a 700 µL nominal capacity with a 2 mm sample region and a PTFE closure, so it suits methods that need a defined narrow sample area rather than a wider chamber. It is supplied as a pack of 2 cuvettes.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	2 mm
Sample Volume (Nominal)	700 µL
Material	Glass
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	2 mm

Choose this option

Choose C102CE11 when your method uses visible-light absorbance and calls for a 10 mm path in a micro cuvette body. The 2 mm sample-region width is a practical point to check if your beam and holder are intended for a narrow sample section, and the included PTFE closure covers the opening during handling. This option is best selected when the optical path, sample-region width and visible-only use all match your setup.

What makes this option different

10 mm optical path for methods built around the standard absorbance path length.
2 mm sample-region width for a narrow sample section within the micro cuvette format.
700 µL nominal capacity for small-volume work without changing to a shorter path length.
Pack of 2 with PTFE closures included for the listed sale unit.

Using this cell

Fill the cell so the measurement beam passes cleanly through the liquid in the intended optical region, and keep the same orientation for blank and sample readings. Because the sample region is narrow, take care to avoid bubbles or droplets sitting in the light path.

The 700 µL figure is the nominal cell capacity. It should not be treated as a minimum working volume, and the closure should not be treated as a pressure-rated or leak-tested seal.

First-use check

Inspect the optical faces and opening for transit damage, chips or residue.
Rinse only with a liquid that is suitable for this construction.
Place the cell in the holder and confirm that the beam crosses the intended sample region.
Run blank and sample in the same orientation.

Fit and optical alignment

This cuvette is described by its 10 mm path length and 2 mm sample region, which are useful starting points when checking holder fit and beam placement. If your instrument has tight beam-height requirements or close body clearances, review those points before ordering.

Z Height is not established here, so instrument matching should be checked where beam-center position is critical. If needed, send your holder model or a drawing with the key clearances for review.

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded construction. For this option, do not soak or rinse with ethanol, and do not use acids, alkalis or organic solvents.

Use mild handling and cleaning conditions that are compatible with the bonded glass body and the PTFE closure. Avoid aggressive cleaning methods and prolonged exposure to unsuitable chemicals.

Included with this option

Supplied as a pack of 2 glass micro cuvettes. PTFE closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom cuvette enquiries for changes related to dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication. Send a dimensioned drawing or labelled sketch, together with your instrument or holder details, critical dimensions, sample conditions and target quantity. Discuss your requirements and quote part number C102CE11.