(C012CS2) Glass Standard Cuvette, 1 mm Path, 350 µL

Weight	30 g

SKU: C012CS2

Original price was: $15.00.Current price is: $14.00.

In Stock

Glass standard cuvette for visible absorbance work with a 1 mm optical path, 350 µL nominal capacity and Two-Way Light transmission. Its open-top format supports direct filling, and a closure is included with this option. Supplied as 1 cuvette per listed price unit.

In Stock

SKU: C012CS2 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012CS2 is a glass standard cuvette for visible absorbance measurements from 350 to 2000 nm. It combines a 1 mm optical path with a 350 µL nominal capacity in an open-top rectangular body, giving you direct access for filling and rinsing while keeping a compact format. This option includes a closure and is supplied as 1 cuvette per listed price unit.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	2000 nm
Sample Volume (Nominal)	350 µL
External Dimensions	3.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	3.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Glass
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 83
Opening Configuration	Open Top

Choose this option

Choose C012CS2 when your method needs a 1 mm transmission path in a compact glass cell and you want direct top access for routine manual filling. It is a practical choice for visible absorbance work where the holder accepts a slim rectangular body and where having a supplied closure is useful for handling or storage between steps.

What makes this option different

1 mm optical path for short-path visible absorbance measurements.
350 µL nominal capacity in a compact rectangular cuvette body.
Open-top construction with a closure included for this option.
Uncapped body size of 3.5 × 12.5 × 45 mm for holder and clearance checks.

Using this cell

Fill from the open top and make sure the liquid level covers the measurement region used by your method. For consistent readings, remove visible bubbles, avoid fingerprints on the optical faces and keep the same orientation when switching between blank and sample.

This cell is specified for visible absorbance use. Use the 1 mm path length in your method setup, and treat the 350 µL value as nominal capacity rather than a minimum working volume.

First-use check

Inspect the optical faces for residue, chips or handling marks, then place the cell in your holder to confirm stable seating. Before routine use, run a blank with your intended liquid so you can verify beam coverage and practical handling in your own setup.

Fit and optical alignment

The stated external dimensions, 3.5 × 12.5 × 45 mm, apply to the uncapped cell body. Use those dimensions to check holder fit, insertion depth and side clearance, and leave additional space above the cell if the supplied closure will remain in place during handling.

Z Height is not specified for this option. If your spectrometer or holder depends on a particular beam-center height, check that alignment against your instrument before ordering.

Solvents and cleaning

This cuvette is listed with the Molded 83 fabrication designation. For this exact glass cell assembly, chemical limits are not specified here, so consider the complete cell and closure when choosing sample and cleaning conditions.

Do not use hydrofluoric acid with glass. Avoid abrasive cleaning methods, and take care with aggressive chemicals, elevated temperatures or long contact times unless you have checked suitability for this exact assembly.

Included with this option

Supplied as 1 cuvette per sale. A closure is included. Additional package contents are not specified here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with your holder or instrument details, critical dimensions, wavelength range and sample conditions. Prototype batches typically involve 2–4 cells; final feasibility, specifications, quantity, price and production time are confirmed in the project quotation. Discuss your requirements.