(C052CC) Glass Large-Window Cuvette, 5 mm Path, 2 mL

Weight	30 g

SKU: C052CC

Original price was: $61.00.Current price is: $55.00.

In Stock

C052CC is a glass large-window cuvette for visible absorbance work from 350 to 800 nm. It combines a 5 mm optical path, 2 mL nominal capacity and an open-top Two-Way Light layout for direct filling and straightforward beam alignment through two opposing faces.

In Stock

SKU: C052CC Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C052CC is a glass large-window cuvette for visible absorbance measurements in the 350–800 nm range. Its 5 mm optical path, 2 mL nominal capacity and open-top body make it a practical choice when you want direct pipette access and a compact cell instead of a taller, higher-volume format.

Path Length: 5 mm
Sample Volume (Nominal): 2 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Path Length	5 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	800 nm
Sample Volume (Nominal)	2 mL
External Dimensions	7.5 × 22.5 × 27 mm
Cell Body Dimensions	7.5 × 22.5 × 27 mm
External Dimensions Scope	Body Only
Material	Glass
Opening Configuration	Open Top

Choose this option

Choose C052CC when your method calls for a 5 mm path length and visible-range measurement, and when you want easy top access for filling, rinsing or checking the sample. The large-window body supports a clear straight-through optical path, while the compact body size helps when holder footprint or vertical clearance is limited.

What makes this option different

Open-top access lets you fill and empty the cell directly from above without working through a cap or fitting.
5 mm optical path provides the short transmission distance specified for this option.
2 mL nominal capacity gives a defined small-volume chamber without moving into ultra-micro handling.
Two-Way Light geometry is used with transmission through two opposing faces, so measurement orientation stays clear and consistent.
Compact large-window body combines a broad optical face with a body measuring 7.5 × 22.5 × 27 mm.
Fused integrated construction forms a joined cell body that is handled and rinsed as an assembly through its open top.

Using this cell

Fill the cell from the top using a pipette or similar controlled transfer method. Before measurement, make sure the sample sits calmly in the optical region and that no bubbles or droplets remain on the transmitting faces.

Use the same orientation for blank and sample so the beam always passes through the intended opposing sides. The 2 mL figure is a nominal capacity, not a minimum working volume, so beam coverage should be checked in your own setup.

First-use check

Inspect the optical faces and top opening for chips, scratches, residue or packing dust. Then place the empty cell in the holder to confirm seating, and run a reference liquid to check beam coverage and a bubble-free optical path in your instrument.

Fit and optical alignment

The stated body dimensions are 7.5 × 22.5 × 27 mm, and these dimensions apply to the body only. Check holder width, depth and height clearance against this footprint, especially if your instrument uses a compact seat or a tight compartment.

This is a Two-Way Light cell for straight transmission across the 5 mm path. Z Height is not listed for this model, so if your instrument has a fixed beam height, confirm beam alignment before ordering rather than assuming a standard center height.

Handling and cleaning

Use this cell for visible-light work within the stated 350–800 nm range. Chemical compatibility limits are not listed for this exact SKU, so match the sample and cleaning liquid to the cell carefully if your method involves aggressive chemicals or special cleaning conditions.

Rinse promptly after use and avoid abrasive cleaning tools or powders on the optical faces. If you are comparing build styles for a particular sample or cleaning routine, see Compare fabrication options.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom cuvette projects for changes involving dimensions, optical path length, sample volume, optical windows, closures and tolerances. Discuss your requirements and quote part number C052CC, including a labelled sketch or drawing if holder fit or beam position is important to your application.