(MQQHC021) Quartz Counting Flow Cell, 0.05 mm path, 0.7 µL nominal capacity, Two Rounded Optical Regions
Description
MQQHC021 combines a 0.05 mm optical path with a 0.7 µL nominal capacity in a compact JGS1 quartz counting flow cell. The small 30 × 8 × 8 mm body and two opposed tube connections make it a practical choice when you need a short-path UV/Vis flow cell in a tightly sized format.
- Path Length
- 0.05 mm
- Sample Volume (Nominal)
- 0.7 µL
- Opening Configuration
- Two Opposed Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Counting Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 0.05 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 0.7 µL |
| External Dimensions | 30 × 8 × 8 mm |
| Cell Body Dimensions | 30 × 8 × 8 mm |
| External Dimensions Scope | Body Only |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 1.5 mm |
| Tube Inner Diameter (ID) | 1 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Two Opposed Fluid Tubes |
| Port Layout | End/side connection at the left in the referenced original; Opposite end/side connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Counting Flow Cell |
Choose this option
Choose MQQHC021 when your method depends on a very short 0.05 mm path and a sub-microlitre nominal cell volume in a fixed flow-through body. The rounded optical-region geometry is part of this model, so it is best selected when your holder, beam path and tubing arrangement already suit this specific body form.
What makes this option different
- 0.05 mm optical path: suitable for methods that need a very short light path through the flowing sample.
- 0.7 µL nominal capacity: a compact sample region within the cell body itself.
- Rounded optical-region design: a distinct body geometry to check against your holder and beam layout.
- Two opposed tube connections: one at each end, with 1.5 mm OD and 1 mm ID tube dimensions.
Structure and dimensions

Using this cell
Install the cell by supporting the quartz body rather than pushing on the projecting tubes. Fill slowly and inspect the optical region carefully, because a very small-volume flow path is more sensitive to trapped bubbles and incomplete wetting during first filling.
The stated 0.7 µL is the nominal cell volume, not a minimum working volume. In use, check that your actual fill and flow conditions keep the illuminated region fully covered before relying on routine measurements.
First-use check
- Inspect the optical faces, body edges and tube openings before installation.
- Seat the cell in the holder and verify alignment with a suitable blank.
- After filling, inspect for bubbles in the illuminated region and repeat the blank in the same installed position.
Fit and optical alignment
View the English selection reference.
The stated 30 × 8 × 8 mm dimensions describe the body only. Check separately for tubing clearance, connector access and bend radius around the installed cell.
This model is identified for UV/Vis use with a Two-Way Light layout. Z Height is not stated here, so beam-centre alignment should be checked against your holder or instrument before ordering if your installation depends on a fixed beam position.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is commonly selected for routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method needs organic solvents or heated treatment, ask about a suitable Sintered or Molded alternative.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Counting Flow Cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to path length, body dimensions, capacity, tube connections and fabrication requirements. Send your holder details, drawing, sample conditions and quantity through our contact page if you need a modified version.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.