Site Navigation

(MQACC035) PTFE Short-Path Cuvette Stopper, 7 mm Base Diameter, 8 mm Height

Weight50 g
SKU: MQACC035

$6.00

In Stock

Compact, non-threaded PTFE stopper with a 3 mm upper section, 7 mm base diameter and 8 mm overall height. Its stepped profile is intended for the matching short-path cuvette opening. Supplied as one stopper; cuvette sold separately.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQACC035 is a PTFE stopper for a short-path cuvette closure arrangement that uses this compact stepped form. The source drawing distinguishes a 3 mm upper section, a 7 mm base diameter and an 8 mm overall height. These describe the stopper profile, so compare the shape as well as the largest diameter with your existing part. This listing is for one stopper only, not a complete cuvette.

Closure Type
Stopper

Selection Specifications

Product KindAccessory
Body Height8 mm
Outer Diameter (OD)7 mm
Closure TypeStopper
Closure MaterialPTFE
Pack Quantity1 Piece
Sales Unitpiece
Package Contents1 × Cuvette cap/lid

Choose this option

Choose MQACC035 when you need this PTFE stopper format as a replacement or spare for an existing cuvette. It is most useful where the closure needs to stay compact above the cuvette while matching the same seating size and shape already used on your cell.

What makes this option different

  • PTFE stopper accessory for a cuvette closure opening.
  • Stepped profile: a 3 mm upper section above the wider 7 mm base. Compare both parts of the profile with your existing stopper and opening.
  • 8 mm body height for checking top clearance and handling space.
  • Supplied as 1 piece, not as a complete cuvette.

Using this accessory

Fit the stopper onto a clean, empty cuvette first, using light hand pressure and supporting the cell body. This is a separate closure accessory, so routine use depends on how well the stopper shape matches the opening and seat of your existing cuvette.

When installing or removing it, avoid twisting or forcing it against the rim. A gentle trial fit helps you check seating and handling before sample is introduced.

First-use check

  1. Inspect the stopper and the cuvette seat for dust, residue or visible damage.
  2. Test the fit on an empty cuvette before filling.
  3. Confirm that the stopper can be installed and removed without excessive force.

Fit and installation

View the English selection reference.

Match the stopper to the receiving opening and seating surface on your current cuvette, not by general appearance alone. The listed 8 mm body height is useful for top-side clearance, but it does not establish insertion depth or sealing performance.

If you are replacing a missing part, the most useful checks are the cuvette SKU and the shape of the mating area. This helps avoid ordering a stopper with the right diameter but the wrong seating form.

English selection reference
Selection reference ↗

Handling and cleaning

Clean the stopper with a method suitable for the full cuvette assembly and the liquids used in your process. Avoid abrasive cleaning on the seating area.

No pressure or leak rating is specified for this accessory. If your application depends on chemical resistance under specific conditions, check suitability for the full cell-and-closure assembly.

Included with this option

One PTFE stopper; the cuvette is purchased separately.

Availability and ordering

Order this listed option directly, or contact us to check current availability and dispatch timing. For a required delivery date, please ask before checkout. Preparation time is separate from carrier transit and customs clearance.

Need a different fit?

For another seating form, send your cuvette SKU or a dimensioned drawing.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQACC035) PTFE Short-Path Cuvette Stopper, 7 mm Base Diameter, 8 mm Height”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare