(MQACC044) PTFE M6 Fitting Set for Dual-Thread Flow Cells
Description
MQACC044 is a PTFE M6 fitting set for use with a dual-thread flow cell that takes two M6 threaded connections. The practical point to check here is not only the thread name, but also the long-and-short tube arrangement shown for this set, because that layout affects how the tubing is routed around the installed cell. This listing is for the fitting set as a separate accessory, supplied as one set.
- Material
- PTFE
- Pack Quantity
- 1 Piece
Selection Specifications
| Product Kind | Accessory |
|---|---|
| Material | PTFE |
| Port Thread | M6 |
| Pack Quantity | 1 Piece |
| Fitting Material | PTFE |
| Sales Unit | set |
| Package Contents | 1 × Fitting set |
Choose this option
Choose MQACC044 when you need the matching threaded connection set for a dual-M6 flow cell and want to replace the fittings without buying another cell body. It suits installations where the existing cell already uses this two-port thread format and the long-and-short tube arrangement matches your present tubing route or mounting space.
What makes this option different
- PTFE fitting set for a flow-cell connection assembly.
- M6 threaded format on the mating fittings.
- Long-and-short tube arrangement to match the installed layout.
- Sold as one fitting set; the cuvette or flow-cell body is not included.
Using this accessory
Support the flow-cell body before fitting or removing the connectors so the ports are not carrying the load from the tubing. Arrange the tubing path first, then tighten the fittings with the parts aligned, avoiding twist or side force on the connection.
This accessory is most useful as a replacement or spare when the original connection style is already known. If you are assembling a new setup, treat the fitting set and the cell body as one connection system and review both together.
First-use check
Inspect the threads and contact surfaces for damage, particles or residue before assembly. After installation, test the complete liquid path with a suitable trial liquid before introducing sample.
Fit and installation
View the English selection reference.
Check the mating thread, seating geometry and tube route against your actual flow cell before ordering. M6 is the nominal port-thread designation, not a 6 mm tube bore. Match the actual thread pitch and seating geometry as well as the designation; M6 alone does not establish interchangeability.
Tube lengths, inner and outer diameters, and tube material are not specified. PTFE describes the fittings, not a confirmed tubing material. Establish these details and the pressure and chemical conditions for the complete flow path before ordering. Route the tubes without side loading the cell ports.

Handling and cleaning
Choose handling and cleaning conditions for the complete wetted assembly, including the cell, fittings, tubing and any seals used with them. If your process involves aggressive chemicals, heat or long contact times, review suitability for the assembled connection rather than assuming the thread format alone determines compatibility.
Included with this option
One MQACC044 fitting set. Cuvettes are not included.
Availability and ordering
Order this listed option directly, or contact us to check current availability and dispatch timing. For a required delivery date, please ask before checkout. Preparation time is separate from carrier transit and customs clearance.
Need a different fit?
For a different thread or connection arrangement, send your cell SKU or a drawing of the connection.
Design notes for this configuration: M6 PTFE Flow-Cell Connector: Specifying the Thread, Seat and Tube
Additional information
| Weight | 80 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.