(MQPCU013) Plastic Semi-Micro Cuvette, Reduced Sample Chamber, Pack of 10
$18.00
MQPCU013 is a plastic semi-micro cuvette with a 10 mm optical path, Two-Way Light transmission and a 1.5 mL nominal capacity. Its open-top chamber gives direct pipette access for routine filling, while the 12.5 × 12.5 mm footprint keeps the familiar square cuvette format. Sold as one pack of 10 cuvettes.
Description
MQPCU013 is a plastic semi-micro cuvette for visible-light measurements in the stated 285-750 nm range. It combines a 10 mm optical path with a reduced 1.5 mL nominal sample chamber, so you keep a standard square cuvette format while working with a smaller filled volume than a full-size cell. The open top leaves the sample region directly accessible for pipette filling, blank preparation and quick changeover in routine lab work.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 1.5 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Semi-Micro Cuvette |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 285 nm |
| Wavelength Range — Upper Limit | 750 nm |
| Sample Volume (Nominal) | 1.5 mL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Plastic |
| Closure Included | No |
| Opening Configuration | Open Top |
| Sales Unit | pack of 10 |
| Package Contents | 10 × Plastic Semi-Micro Cuvette |
Choose this option
Choose MQPCU013 when your method uses a 10 mm absorbance path and you want a semi-micro chamber in a disposable plastic format. This option suits workflows where you fill from above, place the cuvette into a square holder, and need a smaller nominal chamber than a standard-volume cell without changing to a different external footprint.
What makes this option different
- Semi-micro sample chamber: the 1.5 mL nominal capacity gives a reduced chamber format for routine visible measurements without changing away from the familiar square cuvette body.
- 10 mm optical path: this keeps the common path length used by many absorbance methods, so the reduced chamber is paired with a standard measurement path rather than a shortened one.
- Two-Way Light arrangement: the cell is used for transmission along one defined optical path through opposite light faces, which suits straightforward absorbance measurements rather than side-access optical layouts.
- Open-top access: you can fill and empty the chamber directly from above with no lid handling, which is useful for quick pipetting and batch preparation.
- One-piece plastic molding: the cuvette body is supplied as a molded plastic cell rather than an assembled quartz or glass fabrication type.
- Pack of 10: supplied as 10 cuvettes in one sales unit for routine sample series, blanks or repeat runs.
Using this cell
Fill the chamber from the top and make sure the liquid level covers the part of the sample region used by your instrument beam. The semi-micro format reduces the nominal chamber volume, but it does not establish a minimum working fill, so beam coverage still needs to be checked in your own holder and method.
Because this is an open-top cuvette, access is simple during pipetting, mixing by careful manual handling, or rapid sample exchange. It is better suited to bench measurement after filling than to closed or pressure-related handling.
First-use check
- Inspect the optical faces and chamber for dust, scratches or molding residue.
- Place a blank-filled cuvette in your holder and confirm stable seating and beam coverage.
- Check that the measurement region is free of bubbles before running samples.
Fit and optical alignment
View the English selection reference. The body keeps a 12.5 × 12.5 mm square base with a 45 mm body height, which helps when you need a first check against a holder designed for this general cuvette format.
Two-Way Light means the measurement beam passes through the intended opposite optical faces in a single transmission direction. Z Height is not established for this SKU, so if your instrument or method depends on a specific beam-center height, that should be checked before ordering.

Handling and cleaning
Use this cuvette with samples, rinses and handling methods that suit plastic labware. The exact chemical compatibility for this SKU is not established here, so check your sample liquid, rinse solvent and contact conditions before use.
Avoid abrasive wiping, strong heating and unverified solvents that may haze, swell or mark the optical faces. If a cuvette becomes scratched, cloudy or contaminated, replacement is usually more practical than aggressive cleaning.
Included with this option
10 plastic semi-micro cuvettes. The listed price is for one pack of 10. No cap is included with this option.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Need a different fit?
If you need a different material or geometry, send a product-selection enquiry with SKU MQPCU013, your holder details, the measurement wavelength range, the sample liquid and the dimensions that matter for your setup.
Additional information
| Weight | 500 g |
|---|
You must be logged in to post a review.







Reviews
There are no reviews yet.