Site Navigation

(MQQFC030) Quartz Rectangular Sample Cell, 5/1 mm Dual Path, 225 µL, Open at Both Ends

Weight50 g
SKU: MQQFC030

$299.00

In Stock

Quartz rectangular sample cell with 5 mm and 1 mm optical paths in one open-ended body. This JGS1 cell provides Four-Way Light, a 225 µL nominal capacity and an open-at-both-ends design for custom holders or end-sealing arrangements. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC030 is a JGS1 quartz rectangular sample cell for setups that need two defined optical directions in the same compact body. It combines 5 mm and 1 mm path directions, a Four-Way Light layout and an open-at-both-ends sample chamber, so you can build the surrounding holder, sealing and loading method around the cell instead of buying a finished flow assembly.

Its 225 µL nominal capacity and 5 × 1 × 45 mm internal chamber give you a clear starting point for planning sample handling, while the 7.5 × 3.5 × 45 mm exterior helps you check fixture clearance. Because this is a bare open cell body, beam height, end sealing and the final mounted operating volume remain part of your own assembly design.

Path Length
5 mm / 1 mm (dual path)
Sample Volume (Nominal)
225 µL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length5 mm / 1 mm (dual path)
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)225 µL
External Dimensions7.5 × 3.5 × 45 mm
Body Height45 mm
Base Dimensions7.5 × 3.5 mm
Internal Dimensions5 × 1 × 45 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose MQQFC030 when your method benefits from two path directions in one rectangular cell and you need direct access from both ends. This format suits custom fixtures, end supports or special loading arrangements where the cell body must stay small but still offer side optical access and a defined internal chamber.

View the English selection reference. Also available in the product gallery. Group photographs illustrate other options in the series.

What makes this option different

  • Two path directions in one body: the cell provides both 5 mm and 1 mm optical paths, so orientation matters during mounting and measurement.
  • Open at both ends: sample loading and retention are handled by your holder or end arrangement rather than by built-in caps or fittings.
  • Four-Way Light layout: optical access from four sides supports measurement geometries that need more than a single transmission direction.
  • Compact rectangular format: the small external envelope helps when the cell must fit a dedicated fixture with limited clearance.
  • Molded 83 fabrication: this construction is suited to quartz cuvette applications that need a formed quartz body rather than a disposable insert.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Load the sample with a method that matches your own end support and sealing approach. Since the chamber is open at both ends, sample retention, filling direction and bubble control depend on how the cell is mounted and how the liquid is introduced.

Keep the orientation consistent so the beam always travels through the intended 5 mm or 1 mm direction. Use the same orientation for blank and sample measurements to keep the optical setup consistent.

First-use check

  1. Inspect the optical faces and end edges for cleanliness before mounting.
  2. Check that the holder supports the cell securely without point loading or over-tight clamping.
  3. Run a blank in the intended orientation and confirm stable filling, sample retention and bubble-free optical access.

Fit and optical alignment

Use the 7.5 × 3.5 × 45 mm external size to check holder clearance and support points, and use the 5 × 1 × 45 mm internal dimensions to understand the sample chamber itself. The holder should support the body evenly without excessive clamping force on the quartz faces or edges.

Z Height is not specified for this cell, so do not assume beam position from the body height alone. If your instrument or holder has a fixed beam line, verify the mounted beam alignment in the actual fixture before ordering.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Molded 83 fabrication with a JGS1 quartz body. Choose your cleaning method with the full assembly in mind, including any seals, supports or other parts that contact the sample in your setup.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue and a cleaning liquid suitable for both the sample residue and the mounted assembly.

Included with this option

1 MQQFC030 rectangular sample cell. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes to path length, body dimensions, chamber geometry, openings or fabrication requirements. If you need a different mounting fit, send your holder drawing or labelled sketch, beam position, critical dimensions, sample conditions and target quantity for review.

Send a product-selection enquiry with SKU MQQFC030 and your application details.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC030) Quartz Rectangular Sample Cell, 5/1 mm Dual Path, 225 µL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare