(MQQFC089) Quartz Flow Cell, 10 mm Path, 2 mL, Twin Top Tubes
Description
MQQFC089 is a JGS1 quartz flow cell for UV/Vis measurements with a 10 mm optical path and 2 mL nominal capacity. It combines a compact rectangular body with two fixed tube connections, making it a practical choice when you need more internal volume than a micro-flow format while keeping the cell body itself relatively compact.
The connection size is also part of the selection value here. With 4 mm OD / 2 mm ID fixed tubes and a bare body size of 22.5 × 12.5 × 12.5 mm, you can check the fluid connection layout and body fit as separate installation questions.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 2 mL
- Opening Configuration
- Two Fixed Tube Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 2 mL |
| External Dimensions | 22.5 × 12.5 × 12.5 mm |
| Cell Body Dimensions | 22.5 × 12.5 × 12.5 mm |
| External Dimensions Scope | Body Only |
| Body Height | 12.5 mm |
| Base Dimensions | 22.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 4 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Fixed Tube Connections |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC089 when a 10 mm flow path is required and your method benefits from a 2 mL nominal capacity rather than a very low-volume flow cell. The compact rectangular body and fixed tube dimensions are the practical details to compare with your holder space, tubing size and bench layout.
What makes this option different
- 10 mm optical path in a flow-cell format for UV/Vis transmission work.
- 2 mL nominal capacity suits methods that use a moderate internal volume rather than a micro-volume cell.
- 4 mm OD / 2 mm ID fixed tubes give specific connection dimensions for layout planning.
- 22.5 × 12.5 × 12.5 mm bare body lets you assess the body footprint separately from the projecting tube height.
Using this cell
Install the cell with the optical faces aligned in the intended two-way light direction, then connect the tubing so the body remains supported during operation. Fill and flush carefully enough to clear bubbles from the measurement region before recording a blank.
The 2 mL value is the nominal capacity of the cell, not a stated minimum working volume. If your setup includes pumps, valves or added fittings, set operating conditions for the complete assembled flow path rather than for the bare cell alone.
First-use check
- Inspect the optical faces, tube ends and flow-path entrance for visible damage or residue.
- Check body fit in the holder and verify beam alignment with a suitable blank.
- After filling, confirm that the optical region is bubble-free and that no exterior droplets remain on the windows.
Fit and optical alignment
View the English selection reference.
The stated 22.5 × 12.5 × 12.5 mm dimensions apply to the bare body. The shown overall height is 27.5 mm including the fixed tubes, so body fit and connection clearance should be checked separately rather than treated as the same envelope.
No Z Height is established for this SKU. If your holder depends on a specific beam-center height, that point should be confirmed before ordering rather than assumed from the outer body dimensions.

Solvents and cleaning
This cell uses Molded 83 construction. This fabrication is commonly selected for quartz cells used with organic-solvent methods and applications that may involve temperature in the process, but suitability still depends on the complete assembly and on your actual liquid, concentration, temperature and contact time.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the outer optical faces gently with non-abrasive optical tissue.
Included with this option
1 quartz flow cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review related custom JGS1 quartz flow-cell requirements such as body size, path length, tube layout and fabrication choice. Send your enquiry with SKU MQQFC089, your holder dimensions, sample conditions and required quantity.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.