(MQQFC120) Quartz Flow Cell, 10 mm path, Circular Chamber with Side Tubes
Description
MQQFC120 is a JGS1 quartz flow cell for fluorescence spectroscopy with a 10 mm optical path, a circular body and two opposed side tubes. The round chamber format gives you a wide sample region together with side-entry connections, which is useful when tubing approach, holder footprint and access to the cell body all need to be planned as one assembly.
- Path Length
- 10 mm
- Cell Type
- Flow Cell
- Opening Configuration
- Round Cell with Unequal Side Tubes and Axial Opening
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | Fluorescence Spectroscopy |
| Path Length | 10 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Body Height | 14 mm |
| Internal Dimensions | 51 × 10 mm |
| Outer Diameter (OD) | 55 mm |
| Inner Diameter (ID) | 51 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Round Cell with Unequal Side Tubes and Axial Opening |
| Port Layout | Radial side tube on the left of the circular body as drawn; Opposite radial side tube on the right of the circular body as drawn |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC120 when your setup benefits from a broad round flow-cell body rather than a narrow rectangular layout. The 51 × 10 mm internal chamber defines the sample region across the optical path, while the 10 mm axial opening must be accommodated in the mounting arrangement. Two opposed side tubes keep the fluid connections on the sides of the body, so you can plan the tubing route around the cell instead of through an end-fed arrangement.
What makes this option different
- 10 mm optical path in a flow-cell format for fluorescence spectroscopy.
- 51 × 10 mm internal chamber that creates a broad round sample region, helping you judge where liquid sits across the measured path.
- 10 mm axial opening to account for separately when matching the cell and fixture geometry.
- Two opposed side tubes on the circular body, with unequal connection sizes shown in the reference drawing for matched tubing selection.
- JGS1 quartz body for UV to visible use in the stated wavelength range.
- Molded 83 fabrication with source-described optical-contact / integrated-forming construction, a format commonly chosen for methods that may involve organic-solvent handling or temperature-controlled work, subject to the complete assembly and actual exposure conditions.
Using this cell
Support the circular body itself in the holder instead of letting the side tubes carry installation load. When connecting tubing, keep both side connections aligned and free from twist so the body remains seated without side stress.
Fill through the side connections and inspect the measurement region for visible bubbles before a run. The chamber size shown here identifies the sample region geometry, but it is not a stated working-volume specification.
First-use check
- Inspect the chamber, optical faces and tube openings for shipping damage or residue.
- Confirm that the holder supports the round body securely without loading the side tubes.
- Run a blank liquid first and inspect the optical region for visible bubbles.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The body is shown as 55 mm outside diameter with a 14 mm body height, and the side-tube axis is shown on an 81 mm overall layout with 13 mm tube lengths on each side. The two side tubes are not the same size, so check tubing choice and side clearance against the drawing for this exact model.
Z Height is not established for MQQFC120. If your holder or optical setup depends on a defined beam-center height, confirm that point before ordering.

Solvents and cleaning
Molded 83 is commonly selected for methods that may involve organic solvents or temperature-controlled work. For this cell, suitability still depends on the full liquid path and the actual chemicals, concentration, temperature and contact time in your system.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe optical faces gently with suitable non-abrasive lab tissue.
Included with this option
1 Quartz Flow Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for projects involving dimensions, optical path length, optical windows or Z Height, connections, fabrication and tolerances. Send a labelled sketch or drawing together with holder details, liquid conditions and the dimensions that are critical to your setup.
Send a product enquiry with SKU MQQFC120, your instrument or fixture details, liquid conditions, quantity and required delivery timing.
Design notes for this configuration: Circular Quartz Cell with Side Tubes: Defining the Filling and Viewing Routes
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.