(MQQMC022) Quartz Demountable Cuvette, 0.1 mm Path, 8 µL
Description
MQQMC022 is a JGS1 quartz demountable cuvette with a 0.1 mm optical path, 8 µL nominal capacity and a removable cover plate. The 10 × 10 mm sample groove gives you direct access to the measurement area before assembly, which is useful for very thin liquid layers and for solid or powder sample placement in suitable fluorescence work.
- Path Length
- 0.1 mm
- Sample Volume (Nominal)
- 8 µL
- Closure Type
- Removable Cover Plate
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Demountable Cuvette |
| Measurement Mode | Fluorescence Spectroscopy; Solid/Powder Sample Measurement |
| Path Length | 0.1 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 8 µL |
| External Dimensions | 12 × 2 × 45 mm |
| Cell Body Dimensions | 12 × 2 × 45 mm |
| Body Height | 45 mm |
| Base Dimensions | 12 × 2 mm |
| Internal Dimensions | 10 × 10 × 0.1 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Removable Cover Plate |
| Closure Included | Yes |
| Fabrication Method | Standard 80 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Demountable Cuvette; Accompanying closure |
Choose this option
Choose this cell when your method needs a very short 0.1 mm path in a slim demountable format instead of a closed cuvette body. The removable cover plate lets you place the sample directly in the groove, inspect coverage before closing, and work with sample forms that are awkward to load through a narrow opening.
What makes this option different
- 0.1 mm optical path suits methods that require a very short path length.
- 10 × 10 mm sample groove allows direct placement of the sample before seating the cover plate.
- 8 µL nominal capacity matches a very small measurement region without implying a minimum working volume.
- Demountable body and separate cover plate support inspection and placement before measurement.
- Standard 80 adhesive-bonded construction is important when choosing suitable sample and cleaning conditions.
Structure and dimensions

Using this cell
Place the sample in the groove, then seat the cover plate carefully so the sample layer forms across the measurement region. For liquid samples, check that the groove is covered evenly and that no bubbles or visible particles remain in the optical area.
This format can also be used for solid or powder samples when the material needs to be positioned directly in the cell rather than poured into a closed chamber. Handle the body and cover plate gently during loading and cleaning, and avoid dragging the cover across the contact surfaces.
First-use check
- Inspect the groove, optical faces and cover plate for chips, residue or scratches.
- Check that the cell sits correctly in your holder and that the cover plate can be seated without strain.
- Run a blank or background in the same orientation planned for the sample.
Fit and optical alignment
The body dimensions are 12 × 2 × 45 mm, and the cover plate is 12 × 45 × 1.25 mm. The sample groove is shown as 10 × 10 mm with a 0.1 mm depth. Check holder clearance and clamping against this narrow rectangular body rather than assuming fit from path length alone.
Z Height is not stated for this SKU. If your instrument or fixture needs a defined beam-center height, confirm the optical position before ordering.
View the English selection reference.

Solvents and cleaning
Standard 80 indicates an adhesive-bonded quartz construction. This type is generally suited to routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents on the bonded assembly. If your method involves organic solvents or heated treatment, ask about a more suitable Sintered or Molded alternative before ordering.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces and groove gently with non-abrasive laboratory wipes and a suitable aqueous cleaning routine.
Included with this option
1 Quartz Demountable Cuvette and the accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving path length, groove size, external dimensions, closures and fabrication requirements. If you need a different holder fit, beam position or sample geometry, send a drawing or labelled sketch with the critical dimensions and sample conditions.
Send a product-selection enquiry with SKU MQQMC022, your holder details, sample type, quantity and delivery destination.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.