(C102CS104) Quartz Colorimetric Cuvette, 10 mm Path, 6 mL

Weight	100 g

SKU: C102CS104

Original price was: $52.00.Current price is: $47.00.

In Stock

C102CS104 is a quartz colorimetric cuvette with a 10 mm optical path, 6 mL nominal capacity and an open-top body for direct filling. It suits routine colorimetric work when you want a simple rectangular cell and need to check holder space from the body dimensions. Supplied as 1 cuvette per sale unit.

In Stock

SKU: C102CS104 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS104 is a quartz colorimetric cuvette with a 10 mm optical path, 6 mL nominal capacity and an open-top body. It is a straightforward choice for direct filling and rinse-through bench use, especially when you want a simple rectangular sample cell without a built-in closure. This listing is sold as one cuvette.

Path Length: 10 mm
Sample Volume (Nominal): 6 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	6 mL
External Dimensions	14 × 20 × 40 mm
Cell Body Dimensions	14 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	14 × 20 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C102CS104 when your method uses a 10 mm colorimetric path and you want an open-top quartz cell for manual loading. The 6 mL nominal capacity gives a practical chamber size for routine liquid samples, and the stated 14 × 20 × 40 mm body size helps you review holder seating and surrounding clearance before you buy.

What makes this option different

10 mm optical path for colorimetric measurements built around this common path length.
Open-top body for direct pipetting, pouring, emptying and rinsing.
6 mL nominal capacity for routine liquid handling in a full-size rectangular cell.
14 × 20 × 40 mm body dimensions to check holder fit and physical clearance.

Using this cell

Load the sample from the top and fill to a level that covers the measurement region used by your instrument. Before taking a reading, remove visible bubbles and keep the same orientation for blank and sample if your method depends on consistent placement.

The open-top format is convenient for direct handling on the bench, but it also means your filling method and sample level matter. The 6 mL figure is a nominal capacity, not a minimum working volume.

First-use check

Inspect the clear faces and top rim before first use, then test-fit the empty cell in your holder. A blank run at your intended fill level is a practical way to confirm seating and beam coverage before routine measurements.

Fit and optical alignment

The stated 14 × 20 × 40 mm dimensions are for the cell body. Use them to check holder slot size, compartment width and nearby clearance, especially if your instrument has a close-fitting sample area.

Z Height is not established for this SKU. If your instrument depends on a specific beam-center height, do not judge fit from body height alone.

Solvents and cleaning

Clean promptly after use and avoid abrasive materials on the optical faces. If your samples or cleaning routine involve aggressive acids, alkalis or organic liquids, check suitability for the full cell assembly before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. For general background on MQ cuvette constructions, see https://machinedquartz.com/fabrication-method-of-cuvettes/.

Included with this option

Supplied as 1 cuvette. No supplied closure is established for this listing, and other included accessories are not confirmed.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different body size, optical path, capacity or holder-related geometry, we can review a custom quartz version for your application. Send your drawing or holder details through https://machinedquartz.com/contact/ and include part number C102CS104.