(C102CS81) Quartz Micro Cuvette, 10 mm Path, 350 µL, Pack of 2

Weight	30 g

SKU: C102CS81

Original price was: $57.00.Current price is: $52.00.

In Stock

C102CS81 is a black-wall JGS1 quartz micro cuvette for UV/Vis spectroscopy, with a 10 mm optical path, 350 µL nominal capacity and a 1 mm sample-region width. Its Two-Way Light layout keeps the optical path on the main measurement faces, and this sale unit is a pack of 2 cuvettes with lids included.

In Stock

SKU: C102CS81 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS81 is a black-wall JGS1 quartz micro cuvette for UV/Vis spectroscopy when you need a standard 10 mm path in a compact format and want two cells in the same sale unit. This version combines a 350 µL nominal capacity with a 1 mm sample-region width, making it suitable for methods that use a narrow filled measurement zone. The listed sale unit is a pack of 2 cuvettes, with lids included.

Path Length: 10 mm
Sample Volume (Nominal): 350 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	1 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	1 mm

Choose this option

Choose C102CS81 when you want a 10 mm path micro cuvette with a narrow 1 mm sample region and a two-cuvette purchase quantity. That combination is useful when you prefer the same geometry available in duplicate for routine blank/sample handling, parallel preparation or having a spare cell ready without changing the selected format.

What makes this option different

10 mm optical path for standard absorbance methods.
350 µL nominal capacity in a compact micro cuvette format.
1 mm sample-region width for a narrow illuminated sample zone.
Black-wall, Two-Way Light layout with transmission through the main optical faces only.
Sale unit: pack of 2 cuvettes with lids included.

Using this cell

Fill each cell so the illuminated region is covered during measurement, and keep bubbles away from the beam area. The 350 µL value is the nominal capacity, not a minimum working volume, so your actual fill level should suit your beam position and method setup.

If you use one cuvette for blank and the other for sample or duplicate runs, keep their orientation consistent in the holder. Clean the optical faces carefully before measurement so droplets, fingerprints and residue do not interfere with the light path.

First-use check

Inspect both cuvettes on arrival, rinse them with a cleaning liquid suitable for your method, and test the empty fit in your holder. A blank run is a useful first check for beam coverage, stable seating and clean optical faces before sample measurements begin.

Fit and optical alignment

The uncapped cell dimensions are 12.5 × 12.5 × 45 mm. These dimensions apply to the bare cuvette body, so check holder seating and top clearance separately if you plan to keep the lids on during handling or measurement.

Z Height is not listed for this option. If your spectrometer or holder depends on a defined beam-center height, verify that requirement before ordering rather than relying on the outside shape alone.

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded quartz construction. It is suited to routine water-based samples and buffers at room temperature. Avoid organic sample solvents and organic cleaning agents with this construction.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces gently with non-abrasive optical tissue or other suitable optical-surface wipes.

Included with this option

Pack of 2 micro cuvettes with lids.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz cuvette projects for changes to dimensions, path length, sample volume, optical windows, Z Height, closure details and fabrication requirements. Send a labelled drawing or sketch, your holder or instrument details, sample conditions and target quantity through the contact page, and refer to part number C102CS81.