(C102CE14) Quartz Micro Cuvette, 10 mm Path, 350 µL

Weight	30 g

SKU: C102CE14

Original price was: $179.00.Current price is: $162.00.

In Stock

C102CE14 is a quartz micro cuvette for UV/Vis spectroscopy with a 10 mm optical path, Two-Way Light layout and 350 µL nominal capacity. Its 1 mm sample-region slit helps define a narrow measurement zone within the compact cell body. Sold as 1 cuvette per listed price, with lid included.

In Stock

SKU: C102CE14 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CE14 is a quartz micro cuvette for UV/Vis work with a 10 mm optical path in a compact 350 µL format. This option combines a Two-Way Light layout with a narrow 1 mm sample-region slit, which helps define the illuminated zone when your method uses small prepared volumes and straight-through transmission. A lid is included, and the listed price is for 1 cuvette.

Path Length: 10 mm
Sample Volume (Nominal): 350 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	1 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	1 mm

Choose this option

Choose C102CE14 when you need a 10 mm path length but want a lower nominal capacity and a narrower sample region than wider-channel cells in the same body style. The 1 mm slit is the practical distinction here: it helps you judge beam placement in a small filled region, while the 350 µL nominal capacity keeps the cell suited to small-volume UV/Vis preparation. This option is best selected with beam position and fill practice in mind, not body size alone.

What makes this option different

10 mm optical path for UV/Vis methods specified around a straight-through 10 mm measurement path.
350 µL nominal capacity in a micro-cuvette format for small prepared sample volumes.
1 mm sample-region slit for a narrow illuminated region that makes beam placement more important.
Two-Way Light configuration for transmission through two opposing optical faces.
Molded 83 fabrication designation with supplier-described optical contact construction, relevant when choosing sample and cleaning conditions.
12.5 × 12.5 × 45 mm uncapped body for checking holder space, with lid clearance considered separately.

Using this cell

Fill the cell so the illuminated region is fully covered during measurement, and check that no bubbles remain in the optical path. Keep the same orientation and seating for blank and sample runs so the beam passes through the same part of the filled sample zone.

The 350 µL figure is a nominal capacity, not a minimum working volume. If your method works at lower fill levels or uses a tightly positioned beam, check in practice that the liquid fully covers the beam throughout the reading.

First-use check

Inspect the optical faces and chamber for chips, residue or dust.
Place the empty or blank-filled cell in the holder to verify seating and beam access.
Confirm lid clearance separately before routine use.

Fit and optical alignment

The uncapped cell body is 12.5 × 12.5 × 45 mm. Use that body size to check holder fit, but allow separate clearance for the lid because the capped envelope is not specified here.

Z Height is not specified for this option. That matters more with a 1 mm sample-region slit, because a fixed beam height can miss part of the intended region even when the body fits the holder. Check beam position as well as external size before relying on this geometry.

Solvents and cleaning

This option is listed as Molded 83 with supplier-described optical contact construction. For customer selection, that fabrication is generally used where organic-solvent methods may be relevant, but suitability still depends on the complete sample and cleaning conditions for this exact assembly, including the included lid.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. If your method uses aggressive reagents or extended contact time, review the full chemical conditions before use.

Included with this option

1 C102CE14 quartz micro cuvette with lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication requirements. Send a dimensioned drawing or labelled sketch, plus your holder or instrument details, application wavelength range, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C102CE14.