(C102SS11) Quartz Micro Cuvette, 10 mm Path, 700 µL

Weight	30 g

SKU: C102SS11

Original price was: $72.00.Current price is: $65.00.

In Stock

C102SS11 is a quartz micro cuvette with a 10 mm optical path, 700 µL nominal capacity and a 2 mm sample region in a Two-Way Light layout. This Standard 80 adhesive-bonded version includes a closure and suits routine covered measurements with water-based samples and buffers. Supplied as 1 cuvette per price unit.

In Stock

SKU: C102SS11 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102SS11 is a quartz micro cuvette for measurements that use a 10 mm optical path in a compact covered cell. It combines a 700 µL nominal capacity, a 2 mm sample region and a closure in a 12.5 × 12.5 × 45 mm uncapped body, making it a useful option when you want a smaller chamber without changing the stated path length. The listed price is for 1 cuvette.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	2 mm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
Overall Height without Closure	45 mm
External Dimensions Scope	Uncapped Cell
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	2 mm

Choose this option

Choose C102SS11 when your method uses a standard 10 mm transmission path but your sample chamber needs to stay in a micro cuvette format. The narrow 2 mm sample region is the key point to match with your beam footprint and filling practice, and the Standard 80 adhesive-bonded construction suits routine room-temperature water-based samples and buffers. The included closure keeps the top covered during handling and measurement.

What makes this option different

10 mm optical path in a compact Micro Cuvette body.
700 µL nominal capacity with a 2 mm sample region for narrow-beam or compact sample-zone setups.
Standard 80 adhesive-bonded construction suited to routine water-based use at room temperature.
12.5 × 12.5 × 45 mm uncapped body for holder and clearance checks.
Closure included with the cuvette.

Using this cell

Fill the cell so the illuminated region is fully covered, and check that no bubbles remain in the optical path. The nominal 700 µL value describes the chamber capacity, not a minimum working volume, so your actual fill level should be set by the beam position and the part of the sample region you need to cover.

Use the same orientation for blank and sample runs, and seat the closure gently after filling. In a narrow sample region, small differences in orientation, residue or bubble position can affect repeatability, so consistent handling is important.

First-use check

Inspect the optical faces and opening area for fingerprints, dust or visible residue.
Test-fit the uncapped cell in your holder before loading sample.
Run a blank and confirm that the beam passes through the intended filled region without bubbles.

Fit and optical alignment

The stated dimensions apply to the uncapped body: 12.5 × 12.5 × 45 mm. These are the dimensions to check against your holder or seating slot, and you should also allow additional space above the body for the closure.

This is a Two-Way Light cell with transmission through two opposite optical faces. Z Height is not stated here, so do not rely on body height alone if your instrument has a fixed beam center or limited vertical adjustment.

Solvents and cleaning

This cuvette corresponds to Standard 80 adhesive-bonded construction. It is best suited to routine water-based samples and buffers at room temperature. Avoid organic sample solvents and organic cleaning agents with this construction.

The exact chemical limits for the full assembled cell are not specified here, so if your work involves aggressive reagents, elevated temperature or extended contact time, check compatibility before use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

One C102SS11 quartz micro cuvette with an included closure.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different geometry, path length, sample volume or opening style, send a labelled drawing or sketch and reference C102SS11. Holder details are useful when beam position or top clearance is a critical part of the fit. https://machinedquartz.com/contact/