(C104TS11) Quartz Screw-Top Cuvette, 10 mm Path, 1.2 mL

Weight	30 g

SKU: C104TS11

Original price was: $309.00.Current price is: $279.00.

In Stock

C104TS11 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Four-Way Light access and 1.2 mL nominal capacity. Its screw-top body format and molded integrated construction suit UV/Vis and fluorescence spectroscopy methods that need lateral optical access in a compact cell. Sold per 1 cuvette.

In Stock

SKU: C104TS11 Categories: Cuvettes, Products, Quartz Custom Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TS11 is a JGS1 quartz screw-top cuvette for UV/Vis and fluorescence spectroscopy methods that use a 10 mm optical path. It combines Four-Way Light optical access with a 1.2 mL nominal capacity and a short screw-top format, so you can plan both the measurement geometry and the available clearance around the cell.

This model uses a molded integrated construction identified in the source as optical-contact integrated construction. That construction detail matters when you are choosing a cell for solvent method planning and cleaning approach, while the screw-top form and side optical access matter for how the cell sits in your setup.

Path Length: 10 mm
Sample Volume (Nominal): 1.2 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.2 mL
Overall Dimensions with Closure	12.5 × 12.5 × 30 mm
Overall Height with Closure	30 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Fabrication Method	Molded 83

Choose this option

Choose C104TS11 when you need a 10 mm path length in a screw-top quartz cell with optical access from four sides. The 1.2 mL nominal capacity helps you plan sample loading for this specific cell size, while the short overall format is useful when vertical clearance around the measurement position is limited. Because the stated 30 mm height is an overall dimension with cap, check your holder and beam position if your instrument depends on a fixed beam-center height.

What makes this option different

10 mm optical path for methods written around the standard 10 mm transmission length.
Four-Way Light configuration gives optical access from more than one direction, which is relevant to UV/Vis and fluorescence spectroscopy setups that use side access.
1.2 mL nominal capacity defines the cell’s stated sample volume for filling and method planning; it is not a minimum working volume.
Screw-top cuvette format gives a defined top opening style for filling and handling in applications that use this body design.
JGS1 quartz supports use across the stated 200–2500 nm wavelength range for the cell itself.
Molded 83 fabrication with source-stated optical-contact integrated construction is a practical selection point when comparing sample and cleaning requirements, especially for methods that may involve organic solvents.
12.5 × 12.5 × 30 mm overall dimensions with cap help you assess installed space, but they do not establish the bare-body height or beam-center height.

Using this cell

Fill the cuvette so the liquid covers the measurement region required by your method, then remove visible bubbles before reading. Keep the same orientation and seating position for blank and sample so the optical path and side access remain consistent.

The nominal capacity is 1.2 mL, which is useful for planning sample preparation and handling for this exact cell. It should not be treated as a specified minimum working fill.

First-use check

Inspect the optical faces for chips, residue or handling marks. Before routine use, seat the cell in your holder, confirm beam alignment with your intended setup, and run a blank using the same liquid and orientation you will use for measurement.

Fit and optical alignment

The stated overall size is 12.5 × 12.5 × 30 mm with cap. Use that dimension as an envelope check for holder clearance and space above the cell, especially in compact compartments or fixtures with limited top access.

Z Height is not stated for this SKU. If your instrument has a fixed optical axis or a holder designed around a known beam-center height, check alignment before ordering rather than assuming fit from the 10 mm path length alone.

Solvents and cleaning

Molded 83 is commonly selected for methods that may involve organic solvents, and this SKU’s integrated construction is part of that selection context. Even so, solvent suitability depends on the full use condition, including the actual liquid, concentration, temperature, contact time and any closure materials used with the assembly.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive optical tissue and a suitable cleaning liquid for your method.

Included with this option

1 cuvette per listed price unit. Supplied closure and other package contents are not specified for this listing, so please check with us before ordering if your setup depends on a particular cap or accessory.

Availability and ordering

Order this listed specification directly, or ask about current availability and dispatch. If your delivery date is important, ask before checkout; preparation or production time is separate from transit and customs clearance.

Discuss a custom version

If you need a different fit, send a drawing or describe the change you need. Custom JGS1 quartz enquiries can cover dimensions, optical path length, sample volume, optical access and related geometry, with final feasibility, quantity, price and production time confirmed for the project.