(C104TE11) Quartz Micro Cuvette, 10 mm Path, 1.4 mL

Weight	30 g

SKU: C104TE11

Original price was: $475.00.Current price is: $428.00.

In Stock

C104TE11 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and 1.4 mL nominal capacity. This version uses a 4 mm sample-region width and a screw-cap format for enclosed handling in a compact body. Sold as 1 cuvette with closure included.

In Stock

SKU: C104TE11 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TE11 is a JGS1 quartz micro cuvette with a 10 mm optical path, Four-Way Light access and 1.4 mL nominal capacity for fluorescence spectroscopy. Its 4 mm sample-region width sits between the narrower and wider options in this related group, while the screw-cap format keeps the sample in an enclosed micro-cuvette body during routine handling. This listing is for 1 cuvette, with closure included.

Path Length: 10 mm
Sample Volume (Nominal): 1.4 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	4 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	4 mm

Choose this option

Choose C104TE11 when you need a 10 mm fluorescence micro cuvette with side optical access and a moderate sample-region width within this format. The 4 mm sample-region width and 1.4 mL nominal capacity help when your beam footprint or filling preference does not suit the narrower 3 mm version, while the compact 12.5 × 12.5 mm base remains useful for small holders.

What makes this option different

10 mm optical path in a micro cuvette format for fluorescence measurements.
Four-Way Light configuration with optical access on all four vertical sides.
4 mm sample-region width for methods that need a wider illuminated region than the 3 mm version.
1.4 mL nominal capacity in a compact body with a 12.5 × 12.5 mm base.
Screw-cap closure included for enclosed filling and handling.
JGS1 quartz with Molded 83 fabrication for quartz cuvette applications where this construction style is preferred.

Using this cell

Fill the cuvette so the illuminated sample region is fully covered and free of bubbles. Keep the same seating direction for blank and sample measurements, and keep the outer optical faces clean and dry before placing the cell in the instrument.

Seat the cap gently on clean contact surfaces before measurement. The 1.4 mL value is the nominal cell capacity, not a minimum working volume, so your actual fill level should be checked in position against the beam path in your own setup.

First-use check

Inspect the cuvette body, optical faces and closure seating area before first use. Then place the cell in the intended holder, run a blank and confirm that your chosen fill level fully covers the illuminated region without trapped bubbles.

Fit and optical alignment

The base is 12.5 × 12.5 mm, which is useful when checking holder slot size and compartment clearance at the base. The stated 4 mm dimension refers to the sample-region width, so it helps you judge whether the illuminated region suits your beam footprint.

Z Height is not established for this option. If your instrument has a fixed beam-center height or limited vertical adjustment, review cuvette seating and beam alignment before ordering.

Solvents and cleaning

This cuvette uses Molded 83 fabrication. This construction style is commonly selected for methods that may involve organic solvents or temperature-controlled work, but the complete cell assembly and actual exposure conditions still need to suit your process.

Exact chemical limits for this specific option are not established here. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving path length, sample volume, optical layout, sample-region geometry, holder fit, Z Height and closure style. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions and target quantity through Discuss your requirements and quote C104TE11.