(C104TE6) Quartz Screw-Top Cuvette, 10 mm Path, 2.5 mL

Weight	30 g

SKU: C104TE6

Original price was: $599.00.Current price is: $540.00.

In Stock

Quartz screw-top cuvette for infrared spectroscopy with a 10 mm optical path, Four-Way Light layout and 2.5 mL nominal capacity. Its compact 12.5 × 12.5 mm base and short body help when holder footprint and top clearance both matter. Sold as 1 cuvette.

In Stock

SKU: C104TE6 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TE6 is a compact quartz screw-top cuvette for infrared spectroscopy. It combines a 10 mm optical path with Four-Way Light geometry and a 2.5 mL nominal capacity, giving you a familiar transmission path in a shorter screw-top body. The 12.5 × 12.5 mm base is useful when you need a compact holder footprint without moving away from a 10 mm cell.

This MQ sale unit is sold as 1 cuvette. The closure type is screw cap, and the product format includes a capped height reference for clearance planning, which is often helpful in enclosed compartments or tight accessories.

Path Length: 10 mm
Sample Volume (Nominal): 2.5 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	Infrared Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	2.5 mL
Cell Body Dimensions	12.5 × 12.5 × 28 mm
Overall Height without Closure	43 mm
Body Height	28 mm
Overall Height with Closure	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Type	Screw Cap
Fabrication Method	Molded 83

Choose this option

Choose C104TE6 when your infrared method needs a 10 mm path in a compact screw-top format. The key points are the standard path length, four-side optical access and the shorter body geometry. This combination is useful when you want a 10 mm cell that is easier to place in holders with limited footprint or limited space above the measurement position.

What makes this option different

10 mm optical path for infrared methods built around that transmission length.
Four-Way Light layout for optical access from four sides of the cell body.
2.5 mL nominal capacity in a compact screw-top cuvette format.
12.5 × 12.5 mm base, 43 mm uncapped height and 45 mm height with cap for fit and clearance planning.

Using this cell

Fill the cuvette so the liquid covers the measurement region, then check for bubbles before placing it in the instrument. Keep the same orientation for blank and sample if your method uses a fixed alignment, and handle the cuvette by non-optical surfaces to avoid marking the light path.

The stated 2.5 mL is the nominal capacity of the cell, not a minimum working volume. If your method runs at lower fill levels or depends on a specific beam position, check that the sample level will cover the illuminated region in your own setup.

First-use check

Inspect the optical faces for dust, chips or handling marks.
Test the cuvette in your holder and confirm top clearance around the neck area.
Fill with a suitable blank first and verify that the beam passes through a fully covered sample region.

Fit and optical alignment

The base dimensions are 12.5 × 12.5 mm and the body height is 28 mm. The overall height is 43 mm without the cap and 45 mm with the cap. These dimensions help you check holder seating and top clearance separately, especially in closed compartments.

Z Height is not stated for this SKU, so beam-center fit should be checked before ordering if your instrument or holder requires a defined optical height. Four-Way Light describes the optical access pattern, but it does not by itself establish compatibility with every holder design.

Solvents and cleaning

Molded 83 is the fabrication type used for this cuvette. For infrared liquid work, choose sample-contact and cleaning conditions for the complete assembly rather than assuming one broad chemical rating for every reagent.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces gently with suitable non-abrasive tissue. If your sample or rinse routine is chemically demanding, check the full cell-and-closure conditions before use.

Included with this option

Sold as 1 cuvette. A screw cap is the closure type for this item, but the included package contents are not otherwise listed here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, path length, nominal volume, optical windows, Z Height, closures or tolerance requirements. Send a dimensioned drawing or labelled sketch and identify the dimensions that matter for your holder or measurement setup. Discuss your requirements.