(C104CS34) Quartz Micro Cuvette, 10 mm / 4 mm (dual path) Path, 1.4 mL

Weight	30 g

SKU: C104CS34

Original price was: $452.00.Current price is: $407.00.

In Stock

C104CS34 is a JGS1 quartz micro cuvette for fluorescence spectroscopy, with a 10 mm main path, a 4 mm secondary path and Four-Way Light optical access. Its 1.4 mL nominal capacity suits routine micro-volume work in a compact square-body format. Supplied as 1 cuvette with a lid.

In Stock

SKU: C104CS34 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS34 is a JGS1 quartz micro cuvette for fluorescence spectroscopy, combining a 10 mm main path with a 4 mm secondary path in a Four-Way Light body. The 1.4 mL nominal capacity and compact square outline make it a practical choice when you need side optical access without moving to a larger cell. This listing is supplied as 1 cuvette with a lid.

Path Length: 10 mm / 4 mm (dual path)
Sample Volume (Nominal): 1.4 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 4 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	4 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	4 mm

Choose this option

Choose C104CS34 when your method needs a defined 10 mm / 4 mm dual-path layout together with four-side optical access. The compact body helps when holder space is limited, and the open top allows direct filling before covered measurement with the supplied lid. This version uses an optical-contact construction and is a good fit for applications where you want JGS1 quartz with this specific micro-cuvette geometry.

What makes this option different

10 mm main path with a 4 mm secondary path in one micro cuvette.
Four-Way Light layout for optical access from four faces.
1.4 mL nominal capacity with a stated 4 mm sample-region width.
Compact uncapped body size of 12.5 × 12.5 × 45 mm, supplied with a lid.

Using this cell

Fill and empty the cell from the top opening, then place the lid gently for covered measurements. Keep the optical faces clean and dry on the outside, and use the same orientation for blank and sample runs so the beam crosses the same faces each time.

The nominal capacity is 1.4 mL, but that does not define a minimum working volume. Set the fill level so the illuminated region is covered and free from bubbles or residue near the beam path.

First-use check

Inspect the optical faces and edges, rinse with a cleaning liquid suitable for your method, and test-fit the cuvette in the holder before your first full run. A quick blank measurement is a practical way to confirm orientation, beam coverage and lid clearance.

Fit and optical alignment

The listed 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body. If your holder or fluorimeter has limited space above the cuvette, allow extra clearance for the lid because the installed height with closure is not stated here.

Z Height is not stated for this SKU, so beam position should be checked in the actual holder rather than inferred from body height alone. The stated 4 mm sample-region width is part of the internal geometry and should be matched with your method accordingly.

Solvents and cleaning

This cuvette is made from JGS1 quartz with a Molded 83 fabrication classification. It is commonly selected for methods that may involve broader solvent exposure than adhesive-bonded cells, but the chemical limits of this assembled option are not established here, so suitability should still be checked for your actual sample and cleaning conditions.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials. If your method uses aggressive reagents, long exposure times or unusual cleaning chemistry, please check the complete cell-and-lid setup before ordering or routine use.

Included with this option

1 quartz micro cuvette with lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication requirements. Send a dimensioned drawing or labelled sketch through our contact page and quote part number C104CS34.