(C104CS37) Quartz Micro Cuvette, 10 mm / 4 mm (dual path) Path, 1.4 mL

Weight	30 g

SKU: C104CS37

Original price was: $143.00.Current price is: $129.00.

In Stock

C104CS37 is a JGS1 quartz micro cuvette with a 10 mm primary path, 4 mm secondary path and Four-Way Light access for fluorescence spectroscopy setups that use this beam geometry. Its 1.4 mL nominal capacity supports compact sample handling in a micro-cuvette format. Sold as 1 cuvette per listed price unit.

In Stock

SKU: C104CS37 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS37 is a JGS1 quartz micro cuvette with a 10 mm primary path, a 4 mm secondary path and Four-Way Light access. It suits fluorescence spectroscopy setups that use this specific dual-path geometry and side optical access around the sample region. The 1.4 mL nominal capacity and 12.5 × 12.5 × 45 mm uncapped body also give you a clear starting point for holder fit and filling routine.

Path Length: 10 mm / 4 mm (dual path)
Sample Volume (Nominal): 1.4 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Path Length	10 mm / 4 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	4 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	4 mm

Choose this option

Choose C104CS37 when you need this exact dual-path quartz micro cuvette geometry and want to buy the current MQ listed offer as a single cell. Its adhesive-bonded Standard 80 construction is intended for neutral, water-based sample routines, so it is a better fit for controlled fluorescence work than for aggressive chemical or solvent-heavy handling.

What makes this option different

Single-cuvette sale unit: the listed MQ price is for 1 cuvette.
10 mm primary path with 4 mm secondary path: useful when your method calls for this exact dual-path layout in one micro cuvette.
Four-Way Light access: provides optical access from four sides around the sample region for fluorescence-oriented measurement arrangements using this body style.
1.4 mL nominal capacity: describes the chamber size for filling and planning, without implying a minimum working volume.
Uncapped body dimensions of 12.5 × 12.5 × 45 mm: these dimensions help you check holder fit and vertical space independently from closure height.
Standard 80 adhesive-bonded construction: suitable for neutral, water-based use, with explicit restrictions on ethanol, acids, alkalis and organic solvents.

Using this cell

Fill the cuvette so the illuminated sample region is fully covered and free of bubbles. Keep the same seating direction for blank and sample when your method depends on the stated dual-path arrangement or side optical access.

A closure is included for routine handling and should be placed gently on clean contact surfaces. No pressure rating or leak-tight performance is stated for this SKU, so use it as a handling aid rather than as a pressure-resisting closure.

First-use check

Inspect the optical faces and edges before first use.
Check empty fit in the holder before adding sample.
Rinse with a compatible water-based cleaning method.
Run blank and sample in consistent orientation.

Fit and optical alignment

The stated body dimensions apply to the uncapped cell: 12.5 × 12.5 × 45 mm. Check that your holder accepts this body size and that you have enough top clearance if the closure remains on during measurement.

Z Height is not stated for this SKU. If your instrument uses a fixed beam position or close fluorescence alignment, verify beam position against the actual sample region before ordering. The 1.4 mL nominal capacity is not a minimum working fill figure.

Solvents and cleaning

This adhesive-bonded quartz cuvette uses Standard 80 construction. In practice, that makes it a water-based, neutral-sample option rather than a broad chemical-resistance choice.

The supplier excludes acid, alkali and organic-solvent use for this SKU, and ethanol soaking or rinsing is also prohibited. Clean gently, avoid abrasive methods, do not use hydrofluoric acid on quartz, and avoid hot strong alkalis.

Included with this option

1 cuvette per listed price unit. A closure is included with the cell. Other package contents are not specified here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements