(C104SR13) Quartz Micro Cuvette, 10 mm Path, 1.4 mL

Weight	30 g

SKU: C104SR13

Original price was: $293.00.Current price is: $264.00.

In Stock

C104SR13 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and a 1.4 mL nominal capacity. Its 4 mm sample-region width gives a broader measurement zone than narrower variants while keeping the same compact 12.5 × 12.5 mm footprint. Sold as 1 cuvette, with a closure included.

In Stock

SKU: C104SR13 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SR13 is a quartz micro cuvette for fluorescence spectroscopy when you need a 10 mm optical path in a compact body with side optical access. This JGS1 quartz option combines Four-Way Light geometry, a 4 mm sample-region width and a 1.4 mL nominal capacity, with a closure included for covered sample handling.

Path Length: 10 mm
Sample Volume (Nominal): 1.4 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	4 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
External Dimensions	12.5 × 12.5 × 45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Detection Channel Width	4 mm

Choose this option

Choose C104SR13 when your method calls for a 10 mm path length and you want a broader sample region than the narrower-channel versions in the same body style. The 4 mm measurement section helps when you are planning beam placement in a compact holder, while the Four-Way Light layout supports fluorescence measurements that use optical access from multiple faces.

What makes this option different

10 mm optical path for standard cuvette-based fluorescence methods.
Four-Way Light geometry for multi-side optical access.
4 mm sample-region width for a broader defined illuminated section.
1.4 mL nominal capacity in a 12.5 × 12.5 mm footprint, with a closure included.

Using this cell

Fill the cell so the illuminated region is fully covered by liquid, and keep the optical faces free from bubbles, droplets and residue. If you run blanks and samples in sequence, use the same cuvette orientation and holder seating each time for consistent alignment.

The 1.4 mL value is the nominal capacity, not a minimum working volume. If your procedure uses less than a full fill, establish the working level in your own instrument so the beam passes cleanly through the liquid column.

First-use check

Inspect the optical faces, edges and sample region for chips, dust or residue.
Rinse with a suitable liquid for your method, then dry the exterior optical faces carefully.
Test fit the cuvette in the holder and check that the beam passes through the intended region.
Run a blank at your measurement wavelength before loading valuable samples.

Fit and optical alignment

The stated external dimensions are 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. These dimensions are useful for checking holder fit, chamber clearance and top space for the closure before ordering.

The 4 mm value refers to the sample-region width rather than an instrument slit setting. Z Height is not specified for this option, so if your fluorimeter or holder requires a known beam-center height, please confirm that point before purchase.

Solvents and cleaning

Quartz is used here for work across the stated 200–2500 nm range. Clean the optical faces gently with non-abrasive optical tissue or laboratory wipes, and avoid abrasive cleaning methods.

The chemical limits for this exact assembly are not established here. If your sample or cleaning routine involves aggressive chemicals, long contact times or elevated temperatures, please check suitability before use. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis. For general fabrication background, see MQ Cuvette Fabrication Glossary.

Included with this option

One C104SR13 micro cuvette. A closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz cuvettes for changes involving dimensions, path length, sample volume, optical windows, Z Height, closures and tolerances. Send a dimensioned drawing or labelled sketch together with your holder details, wavelength range, sample conditions and target quantity. Contact us here and quote C104SR13.