(C104TR3) Quartz Screw-Top Cuvette, 10 mm Path, Pack of 2

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C104TR3

Original price was: $379.00.Current price is: $342.00.

In Stock

C104TR3 is a JGS1 quartz screw-top cuvette pack for UV/Vis spectroscopy with a 10 mm optical path and Four-Way Light geometry. It suits methods that use a standard 1 cm path while needing optical access on all four sides in a covered cell format. Sold as a pack of 2 cuvettes, with PTFE closures included.

In Stock

SKU: C104TR3 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TR3 is a JGS1 quartz screw-top cuvette pack for UV/Vis spectroscopy with a 10 mm optical path and Four-Way Light geometry. It combines a standard 1 cm path with optical access on all four sides and supplies two cuvettes in the same sale unit, which is useful when you want a matched handling format for blank-and-sample work or parallel preparation. PTFE closures are included with the cuvettes.

Path Length: 10 mm
Cell Type: Screw-Top Cuvette
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C104TR3 when you need a 10 mm quartz cuvette for UV/Vis work, want Four-Way Light geometry, and prefer to buy two cuvettes together. The covered format helps keep each filled cell closed during routine handling, while the four-side optical access is useful in compatible setups that need more than a straight two-face layout.

What makes this option different

Pack of 2 cuvettes as the actual sale unit for this SKU.
10 mm path length for UV/Vis methods based on a standard 1 cm path.
Four-Way Light geometry for optical access on all four sides.
PTFE closures included for a covered cell format.

Using this cell

Fill each cuvette so the liquid fully covers the beam path used in your instrument. Before measurement, remove visible bubbles and keep the optical faces clean and dry on the outside.

When the pair is used for blank and sample work, keep both cuvettes oriented consistently in the holder. Handle them by the non-optical surfaces where possible to reduce fingerprints on the measurement faces.

The included closures support covered laboratory handling, but no pressure rating or leak-tight performance is stated here. Use them as covered sample cells rather than as pressure-rated or gas-tight containers.

First-use check

Inspect both cuvettes and closures for dust, chips or scratches.
Rinse with a cleaning liquid suitable for your method.
Run a blank and verify that the filled liquid covers the beam area.
Check that both cuvettes seat consistently in your holder if you plan to use them as a pair.

Fit and optical alignment

The confirmed optical details are the 10 mm path length and Four-Way Light layout. Exact external dimensions, overall height and Z Height are not established here, so check holder clearance and beam-center fit before ordering when your instrument uses a fixed beam height or limited top clearance.

Nominal volume is not settled for this exact option. If your method depends on fill level in relation to beam position, confirm beam coverage in your own setup before routine use.

Solvents and cleaning

Compare fabrication options if your sample or cleaning routine involves more demanding chemical conditions. The chemical limits of this complete cuvette-and-closure assembly are not established here, so compatibility should be checked when solvent, concentration, temperature or contact time matters.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as a pack of 2 quartz screw-top cuvettes with included PTFE closures. Other package contents such as box details are not specified here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, optical path length, sample volume, optical windows, closures or other fit requirements. If your setup depends on a particular holder, beam height or body envelope, send a drawing or labelled sketch with the critical dimensions and sample conditions.

Discuss your requirements and quote part number C104TR3.