(C102CS20) Quartz Micro Cuvette, 10 mm Path, 700 µL

Weight	30 g

SKU: C102CS20

Original price was: $19.00.Current price is: $18.00.

In Stock

C102CS20 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 10 mm optical path, 700 µL nominal capacity and a 2 mm sample region. It includes a PTFE lid and is sold as 1 cuvette. This adhesive-bonded version is intended for neutral solutions only.

In Stock

SKU: C102CS20 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS20 is a JGS1 quartz micro cuvette for UV/Vis work when you need a 10 mm path length in a smaller 700 µL format. This single-cuvette option combines a Two-Way Light layout, a 2 mm sample region and a compact 12.5 × 12.5 × 45 mm uncapped body, and its adhesive-bonded construction is specifically restricted to neutral solutions.

Path Length: 10 mm
Sample Volume (Nominal): 700 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	2 mm

Choose this option

Choose C102CS20 when your method uses a standard 10 mm transmission path but sample volume is closer to the 700 µL nominal range than to a larger square cuvette. The included PTFE lid gives covered handling, while the restricted neutral-solution use makes this version suitable only where your sample and cleaning routine stay within those limits.

What makes this option different

10 mm optical path in a compact Micro Cuvette body for UV/Vis transmission work.
700 µL nominal capacity with a 2 mm sample region.
Adhesive-bonded quartz construction restricted to neutral solutions.
Sold as 1 cuvette with a PTFE lid included.

Using this cell

Fill the cell so the illuminated region is fully covered during measurement, and keep the same orientation for blank and sample runs. Avoid bubbles in the optical path and wipe the exterior optical faces before placing the cuvette in the instrument.

The 700 µL value is the nominal capacity, not a minimum working volume. If you plan to work below full fill, check beam coverage in your own setup before routine use.

First-use check

Inspect the optical faces and interior before first use, then test the cuvette in the intended holder. A blank run with the planned fill level will help confirm seating, beam passage and whether your liquid level fully covers the illuminated region.

Fit and optical alignment

The stated 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body. Use them to check holder fit and top clearance, but do not treat them as the full installed envelope with the lid in place.

Z Height is not specified for this option. If your holder or method depends on a fixed beam-center height, that alignment should be checked on the instrument side. The 2 mm sample region is also relevant when beam position is tight.

Solvents and cleaning

This cuvette uses Standard 80 adhesive-bonded construction. For this version, the supplier restriction is neutral solutions only.

Do not soak or rinse this cell with ethanol, and do not use acids, alkalis or organic solvents with this construction. As with any quartz cell, do not use hydrofluoric acid. Avoid hot strong alkalis and abrasive cleaning, and use a gentle non-abrasive routine suitable for neutral aqueous work.

Included with this option

Supplied as 1 micro cuvette with a PTFE lid included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch together with your holder information, wavelength range and sample conditions. Discuss your requirements and quote part number C102CS20.