(C102CE13) Quartz Micro Cuvette, 10 mm Path, 350 µL, Pack of 2

Weight	30 g

SKU: C102CE13

Original price was: $357.00.Current price is: $322.00.

In Stock

JGS1 quartz micro cuvette C102CE13 combines a 10 mm optical path with a 350 µL nominal capacity for UV/Vis work in a compact format. Its 1 mm sample region suits narrow-beam measurement setups, and this MQ offer is supplied as a pack of 2 cuvettes with PTFE closures.

In Stock

SKU: C102CE13 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CE13 is a JGS1 quartz micro cuvette for UV/Vis measurements when you need a 10 mm path in a smaller-volume cell and want the same geometry supplied as a pair. Each cuvette has a 350 µL nominal capacity, a 1 mm sample region and a compact uncapped 12.5 × 12.5 × 45 mm body, making this option useful for duplicate handling, parallel preparation or keeping a matched setup routine across two cells. The stated wavelength range for this option is 200–2500 nm.

Path Length: 10 mm
Sample Volume (Nominal): 350 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	1 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	1 mm

Choose this option

Choose C102CE13 when you want this narrow-region micro-cuvette format supplied as a pack of 2 for routine paired use. The practical selection points are the 10 mm optical path, the 1 mm sample region and the two-cuvette sale unit, which can suit blank-and-sample work, repeat preparation or keeping a spare in the same geometry.

What makes this option different

Pack of 2 cuvettes in the same C102CE13 geometry.
10 mm optical path for UV/Vis transmission measurements.
350 µL nominal capacity in each cuvette.
1 mm sample region for setups built around a narrow reading zone.
Two-Way Light layout for a straight optical path through each cell.
Compact 12.5 × 12.5 × 45 mm uncapped body for holder-fit checks.
Each cuvette is supplied with a PTFE closure.

Using this cell

Fill each cuvette so the intended reading region is fully covered and free of trapped bubbles or droplets on the optical faces. When you use the pair for blank and sample, or for duplicate runs, keep the orientation and filling practice consistent between both cells.

Place the PTFE closures after filling and handle the cells carefully to keep the optical faces clean. The 350 µL value is the nominal capacity of each cuvette and should not be treated as a minimum working volume.

First-use check

Inspect both cuvettes for clean optical faces, intact rims and consistent handling condition.
Test-fit each uncapped body in the holder you plan to use.
Run a blank or duplicate fill to confirm beam coverage and handling consistency across the pair.

Fit and optical alignment

The stated 12.5 × 12.5 × 45 mm dimensions apply to each uncapped cuvette body. Use those dimensions to check holder fit for both cells, and allow extra top clearance for the installed closures.

Z Height is not specified for this SKU. If your instrument requires a defined beam-center height, check that point before ordering rather than assuming compatibility from the external body size alone.

Solvents and cleaning

This option is listed under Molded 83, with supplier joining described as optical contact. For selection, this type is generally used for methods that may involve organic solvents or temperature-controlled work, but the chemical limits for this exact SKU are not established here.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and choose a cleaning routine that suits both the quartz body and the PTFE closures used with the sample.

Included with this option

Two C102CE13 JGS1 quartz micro cuvettes, each supplied with an included PTFE closure.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz versions for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures or fabrication requirements. If you need a different fit, send a labelled drawing or sketch together with holder details, wavelength range and sample conditions. Discuss your requirements and reference C102CE13.