(C104TE13) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL

Weight	30 g
Dimensions	1.25 × 1.25 × 5.5 mm

SKU: C104TE13

Original price was: $171.00.Current price is: $154.00.

In Stock

C104TE13 is a quartz screw-top cuvette for UV/Vis spectroscopy, with a 10 mm optical path, Four-Way Light geometry and 3.5 mL nominal capacity. The square body and threaded opening suit covered sample handling with side optical access on all four faces. Supplied as 1 cuvette.

In Stock

SKU: C104TE13 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TE13 is a quartz screw-top cuvette for UV/Vis spectroscopy with a 10 mm optical path and Four-Way Light geometry. Its 3.5 mL nominal capacity and square body make it a practical choice when you want a familiar cuvette footprint together with optical access from all four sides of the cell body. This option is sold as 1 cuvette.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 35 mm
Overall Height without Closure	55 mm
Body Height	35 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Type	Screw Cap
Fabrication Method	Molded 83

Choose this option

Choose C104TE13 when your method uses a 10 mm path and benefits from four-sided optical access rather than a two-window transmission layout. The threaded top gives you a screw-top opening for covered sample handling, while the 12.5 × 12.5 mm body and 35 mm optical section help you check fit in holders designed around a full-size square cuvette.

What makes this option different

10 mm optical path for UV/Vis methods written around a 1 cm cell.
Four-Way Light geometry for optical access on all four sides of the cuvette body.
Screw-top opening for filling and handling in a covered cell format.
35 mm optical body with 55 mm uncapped height to separate holder fit at the body from vertical clearance at the neck.

Using this cell

Fill the cell so the liquid level fully covers the beam area used by your instrument, then fit your closure arrangement if your procedure requires the sample to be covered. Keep the same orientation for blank and sample runs when your method depends on consistent placement, and handle the cuvette by the non-optical surfaces where possible.

The stated 3.5 mL is the nominal cell capacity. It should not be treated as a minimum working volume, so low-fill methods should be checked against the actual liquid level at the instrument beam position.

First-use check

Inspect all optical faces for dust, residue or handling marks.
Rinse with a liquid suitable for your method and the assembled cell setup you plan to use.
Place a blank in the same orientation planned for the sample.
Check that the filled liquid level covers the beam position in your instrument.

Fit and optical alignment

The square base is 12.5 × 12.5 mm, with a 35 mm optical body. The uncapped height is 55 mm from the base to the top of the neck, which is useful when checking clearance above the holder separately from the optical section that sits in the beam area.

Z Height is not listed for this SKU, so instrument fit should not be assumed from the outside body dimensions alone. If your spectrometer or accessory depends on a fixed beam-center height, please confirm that requirement before ordering.

Solvents and cleaning

This cuvette is listed under Molded 83 fabrication. In practice, choose sample and cleaning conditions that suit the complete assembled cell used in your method.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials. Chemical limits for the selected assembly are not listed here, so if your application involves aggressive chemicals, concentration, temperature or long contact time, please check suitability before use.

Included with this option

Price is for 1 cuvette. A screw-cap closure type applies to this product design, but the included package contents are not listed here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch together with holder or instrument information, critical dimensions and sample conditions. Discuss your requirements and quote part number C104TE13.