(C104CQE) Quartz Fluorescence Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g

SKU: C104CQE

Original price was: $266.00.Current price is: $240.00.

In Stock

C104CQE is a quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. Its open-top body allows direct filling, and a closure is included with this option. Sold as a pack of 2.

In Stock

SKU: C104CQE Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CQE is a quartz fluorescence cuvette for methods built around a 10 mm optical path and optical access from four sides. Its 3.5 mL nominal capacity and open-top body make it easy to fill, inspect and handle in routine liquid-sample work, while the rectangular cuvette format remains familiar for standard holder layouts. This sale option is supplied as a pack of 2, with a closure included.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Included	Yes
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C104CQE when you need a four-way fluorescence cell that can be filled directly from above and used in a 10 mm path setup. The open sample access is useful for pipetting, visual fill checks and straightforward rinsing between runs, and the 3.5 mL nominal capacity suits methods that work with a conventional cuvette volume rather than a micro-volume format.

What makes this option different

10 mm optical path for methods written around this path length.
Four-Way Light layout for optical access through all four side faces.
Open-top cell body for direct filling and visual inspection of the sample region.
Pack of 2 for this MQ sale option, with closure included.

Using this cell

Fill the cell from the top and keep the optical faces clean and dry in the beam area before measurement. If your method is sensitive to bubbles, check the sample region after filling and allow the liquid to settle before placing the cell in the holder.

In fluorescence work, keep the same cell orientation between blank and sample runs when your setup uses defined excitation and collection directions. The stated 3.5 mL figure is a nominal capacity, not a minimum working volume, so the fill level still needs to suit your instrument geometry and measurement method.

First-use check

Inspect the optical faces and rim for chips, residue or transport marks.
Test the cell in your holder and check top clearance for the closure.
Run a blank first and verify that the beam passes through a clean, fully filled sample region.

Fit and optical alignment

The listed dimensions are 12.5 × 12.5 × 45 mm for the cell body. These body dimensions are useful for checking holder seating and compartment space, especially if you plan to leave the closure in place during handling or measurement.

Z Height is not stated for this option. If your instrument uses a fixed beam height or a tight fluorescence holder, check beam position and vertical clearance before ordering rather than relying on body height alone.

Solvents and cleaning

Quartz is used for the cell body, but the chemical limits of this complete selected assembly are not established here. If your sample, rinse solvent or cleaning routine is chemically aggressive, check compatibility for the full use condition before ordering.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with suitable non-abrasive laboratory tissue, and see the general fabrication options overview if you are selecting for a specific solvent routine.

Included with this option

Supplied as 2 quartz fluorescence cuvettes in the selected sales pack. A closure is included with this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different body size, optical path, volume, opening style or holder fit, send your drawing or labelled sketch and note the dimensions that matter in your setup. Include your instrument or holder details, sample conditions and required quantity when you contact us.