(C104CQR) Quartz Fluorescence Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g

SKU: C104CQR

Original price was: $124.00.Current price is: $112.00.

In Stock

C104CQR is a JGS1 quartz fluorescence cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. Its open rectangular chamber allows direct filling and inspection; the flat lid covers the opening during routine handling, while side access lets you keep excitation and collection orientation consistent.

In Stock

SKU: C104CQR Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CQR is a JGS1 quartz fluorescence cuvette for methods that use a 10 mm optical path and side access from four faces. Its 3.5 mL nominal capacity suits liquid samples in a familiar rectangular format, while the supplied lids help cover each cell during handling between filling and measurement. This MQ sale option is supplied as a pack of 2.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C104CQR when you need a rectangular fluorescence cuvette with a standard 10 mm path and four-sided optical access. The 3.5 mL nominal capacity gives you a full-size sample chamber rather than a microvolume format, and the pack-of-2 sale unit is useful when your workflow keeps separate cells for blank and sample or when you want a second matching cell ready for repeat work.

What makes this option different

10 mm optical path for methods built around the common 10 mm cuvette format.
Four-Way Light configuration gives optical access from all four side faces for fluorescence measurement setups that use this beam geometry.
3.5 mL nominal capacity provides a larger liquid chamber than a microvolume cell, with direct top filling.
JGS1 quartz body for fluorescence spectroscopy use across the stated 200–2500 nm range.
Uncapped body size of 12.5 × 12.5 × 45 mm helps you check holder fit and compartment clearance separately from any lid height.
Pack of 2 for this MQ sale option, with an accompanying lid included.

Using this cell

Fill the cell from the top, then place it in a suitable holder with the optical faces aligned to your excitation and collection directions. Keep the beam area free from bubbles, fingerprints and dried residue, and use the same orientation each time if your method compares blank and sample in separate cells.

The 3.5 mL figure is the nominal capacity of each cuvette. It should not be treated as a minimum working volume, and the assembly should not be treated as a pressure seal.

First-use check

Inspect both cuvettes for clean optical faces, undamaged rims and proper lid fit.
Test the uncapped body fit in your holder before filling.
Run your blank in the same orientation you plan to use for the sample.

Fit and optical alignment

The listed 12.5 × 12.5 × 45 mm dimensions describe the uncapped cell body. Check holder seating and top clearance if your instrument compartment is tight or if your fixture sits close above the cuvette rim.

Z Height is not stated for this SKU. If your setup depends on a fixed beam-center height, confirm that requirement against your holder or drawing before purchase.

Solvents and cleaning

Choose sample and cleaning conditions that suit quartz and the complete cuvette assembly, including the lid. The exact chemical limits for this option are not established here.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe exterior optical faces with non-abrasive optical tissue. If you are reviewing general construction approaches for a different solvent routine, see fabrication method of cuvettes.

Included with this option

Pack of 2 quartz fluorescence cuvettes. An accompanying lid is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes to dimensions, optical path length, sample volume, optical windows or Z Height, closures and related fit requirements. Send a dimensioned drawing or labelled sketch, plus holder details, sample conditions and target quantity when you contact us and quote part number C104CQR.