(C102SR29) Quartz Stoppered Cuvette, 10 mm Path

Weight	30 g

SKU: C102SR29

Original price was: $76.00.Current price is: $69.00.

In Stock

C102SR29 is a quartz stoppered cuvette with a 10 mm optical path and Two-Way Light geometry for transmission measurements through two opposite optical faces. The PTFE stopper is included, giving you a covered sample opening in a standard rectangular cell format. Sold as 1 cuvette per listed price unit.

In Stock

SKU: C102SR29 Categories: Cuvettes, Products, Quartz Stoppered Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102SR29 is a quartz stoppered cuvette for methods built around a 10 mm optical path in a covered-top cell format. Its PTFE stopper lets you fill the cell and then close the opening for routine handling, while the Two-Way Light layout keeps the optical path focused on transmission through two opposite faces. This MQ listing is sold as 1 cuvette per price unit.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Stoppered Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	3.5 mL
Material	Quartz
Closure Type	Stopper
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C102SR29 when you want a quartz cell with direct top access for filling, plus a fitted stopper rather than an open sample chamber. This format suits bench work where the sample should remain covered after loading, and where your method is written for a 10 mm transmission path. It is a practical choice for single-cell replacement, method setup or routine use in a holder that accepts this style of cuvette.

What makes this option different

Stoppered top: the sample is filled from the top and then covered with an included PTFE stopper.
10 mm path length: matches methods specified for a 10 mm optical path.
Two-Way Light layout: measurement uses two opposite optical faces for through-beam transmission work.
Quartz body: suited to optical cell use where quartz is required by the method.
Single-piece MQ sale unit: this listing is priced as 1 cuvette.

Using this cell

Fill the cuvette from the top and make sure the liquid level fully covers the beam area used by your instrument. After filling, seat the PTFE stopper gently so the opening is covered during placement and measurement.

Keep the same cell orientation for blank and sample runs if your method depends on consistent positioning. Handle the cuvette by the non-optical sides to reduce fingerprints and residue on the measurement faces, and check for bubbles before reading.

First-use check

Inspect the cuvette and stopper for visible chips, particles or handling residue before first use. Rinse with a suitable liquid for your method, place a blank in the holder, and confirm that the filled level covers the beam region in your instrument.

Fit and optical alignment

This cuvette has a confirmed 10 mm optical path, but the external fit envelope and Z Height are not established here. If your holder has limited top clearance, a fixed beam height, or a tight compartment opening, check those points before ordering.

The stoppered top covers the opening during routine use, but it should not be treated as a pressure-rated, leak-tested or closed-circuit assembly. If your process involves inversion, transport while filled, or other demanding handling conditions, review that requirement separately.

Solvents and cleaning

The cell body is quartz and the stopper is PTFE. The exact chemical limits of the assembled cell-and-stopper combination are not established here, so if your sample or cleaning routine involves aggressive chemicals, elevated temperature or long contact time, check suitability for the complete assembly before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe the optical faces gently with non-abrasive laboratory tissue or another suitable non-scratching material. For general fabrication guidance, see this fabrication overview.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different fit, we can review custom quartz cuvette requirements involving dimensions, path length, optical windows, closures or holder-related details. Please send your holder or instrument information, critical dimensions, sample conditions and required quantity at https://machinedquartz.com/contact/ and reference C102SR29.