(C104TS5) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C104TS5

Original price was: $352.00.Current price is: $317.00.

In Stock

C104TS5 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Four-Way Light access and 3.5 mL nominal capacity. The threaded neck and included PTFE cap suit covered sample handling, while the four-side optical access is useful where side observation or side illumination is part of the setup. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C104TS5 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TS5 is a quartz screw-top cuvette for 10 mm path measurements in a covered sample format. It combines JGS1 quartz, Four-Way Light access and a 3.5 mL nominal capacity, with a threaded neck and PTFE cap for top filling and closure. Sold as a pack of 2 cuvettes, this option suits workflows that need two matching covered cells in the same geometry.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Threaded Neck

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 38 mm
Overall Height without Closure	54 mm
Body Height	38 mm
Overall Height with Closure	58 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Opening Configuration	Threaded Neck

Choose this option

Choose C104TS5 when you need a 10 mm cuvette with optical access on all four vertical sides rather than a straight two-face layout. The screw-top opening gives direct top access for filling, and the covered format is useful when you want to prepare, move and measure the sample in the same cell. The pack-of-2 sale unit also fits routine blank-and-sample work or keeping one matching spare ready in the same format.

What makes this option different

Four-Way Light configuration keeps all four vertical sides available for optical access.
10 mm optical path with 3.5 mL nominal capacity suits conventional filled-cell methods.
Threaded neck with PTFE screw cap included supports top filling in a covered cell format.
Pack of 2 cuvettes under one priced sales unit.

Using this cell

Fill through the threaded neck and fit the cap after loading the sample. Keep the optical faces clean and dry on the outside, and make sure the liquid level covers the beam region used by your instrument. If your method uses a blank and sample, keep both cells in a consistent orientation during handling and measurement.

The screw cap provides a covered sample chamber, but no pressure rating is stated for this SKU. Select it for routine filled-sample handling rather than pressurised use.

First-use check

Inspect both cuvettes before first use, rinse with a method-suitable liquid, and check that the cap threads seat properly on each cell. Before measurement, remove bubbles from the optical path and wipe the outside faces carefully so no residue remains in the beam area.

Fit and optical alignment

The cell body footprint is 12.5 × 12.5 mm with a 38 mm body height. The stated overall height is 54 mm without the cap and 58 mm with the cap fitted, which are the main dimensions to check for holder clearance and compartment height.

Z Height is not established for this item. If your holder or instrument depends on a defined beam-center height, check that requirement separately rather than relying only on the outside body size. The 3.5 mL value is a nominal capacity, not a minimum working volume.

Solvents and cleaning

This cuvette is listed under Molded 83 fabrication. For this SKU, choose sample and cleaning conditions with the full wetted assembly in mind, including the closure, because exact chemical limits are not specified here.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue or laboratory wipes.

Included with this option

Supplied as a pack of 2 quartz screw-top cuvettes. Caps are included. The exact box details are not listed here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that matter to your application. Prototype batches typically involve 2–4 cells; final specifications, quantity, price and production time are confirmed in quotation. Discuss your requirements and quote part number C104TS5.